Sony CCD-TR440PK Instrukcja serwisowa - Strona 16
Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Kamera Sony CCD-TR440PK. Sony CCD-TR440PK 22 stron. Video camera recorder
Drukuj stronę
Charging
Temperature
You should charge batteries
attemperatures f rom 50eFto86°F(fromI0°C to30°C). Lower temperatures
require a longer charging time.
Sony Batteries
are Recommended
Use ofnon-Sonybatteries
may damage your Handycam camcorder.
Notes on Charging
_
,_
A Brand-new
Battery
A brand-new
battery
pack is not charged.
Before
using
the battery
pack, charge
it completely.
After
Long
Storage
Recharge the batterypack aftera long period of storage.Ifthe battery pack ischarged fullybut not used
fora long time (about I year), it becomes discharged. Charge itagain,but in thiscase the battery life will
be shorter than normal. After several charging and discharging _,cles,the battery life willrecover its
original
capadty.
Notes on the Terminals
If the terminals
(metal
parts on the back) are not clean, the battery
charge
duration
will be
shortened.
When the terminals
are not clean or when
the battery
pack has not been used
for a long time, repeat
installing
and removing
the battery
pack a few times.
This improves
the contact
condition.
Also,
wipe
the + and - terminals
with a soft cloth or paper.
Be Sure
to
Observe
the
Following
• To prevent
an accident
caused by a short circuit,
do not allow
metal objects
such as a necklace
to touch
the battery
terminals.
Carry the battery
pack attaching
to the terminal
cover.
[d]
* Keep the battery
pack away
from fire.
• Keep the battery
pack
dry.
• Do not open nor convert
the battery
pack.
• Do not expose
the battery
pack
to any mechanical
shock.
It]
If the camcorder is brought directly from a cold place to a warm place, moisture may condense inside the
camcorder, on the surface of the tape, or on the lens. If this happens, the tape may stick to the head drum
and be damaged or the camcorder may not operate correctly. To prevent possible damage under these
circumstances, the camcorder is furnished
with moisture sensors. However, take the following
precautions.
Inside
the Camcorder
If there is moisture inside the camcorder, the beep sounds and the [] indicator or the DEW lamp flashes.
If this happens, none of the function except cassette ejection will work. Open the cassette compartment,
turn off the camcorder, and leave it about 1 hour. When A indicator flashes at the same time, the cassette
is inserted in the camcorder. Eject the cassette, turn off the camcorder, and leave also the cassette about 1
hour.
\1
I I/
..'[]A'..
"ii iix"
On
the
Lens
No indicator
will appear, but the picture
becomes
dim. Turn off the !:x)wer and do not use the camcorder
for about
I hour.
How
to Prevent
Moisture
Condensation
When
bringing the camcorder from a cold place toa warm
place,put the camcorder in a plastic bag and
allow itto adapt to room conditions over a period of time.
(1) Be sure to tightly sealthe plasticbag containing the camcorder.
(2) Remove
the bag when
the airtemperature insideithas reached the temperature surrounding it (after
about I hour).
o
;r
3"
m
3"
34
35