Sony CCU-790P Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kamera Sony CCU-790P. Sony CCU-790P 18 stron. Camera control unit
Również dla Sony CCU-790P: Broszura i specyfikacje (14 strony)

Drukuj stronę

Overview

The CCU-790/790P Camera Control Unit provides a

variety of remote control and adjustment functions for the

processing of signals from a BVP-E10/E10P/E10WS/

E10WSP/E30/E30P/E30WS/E30WSP CCD Color Video

Camera, and can be used in Electronic Field Production

(EFP) or studio work. Signal control is performed with an

optional MSU-900/950 Master Setup Unit or an RCP-750/

751/920/921 Remote Control Panel.

The CCU-790/790P has the following features:

Wide variety of system configurations

• The optional CA-905K/F/T large-lens adaptor allows a

large lens to be fitted onto the portable video camera and

used in conjunction with the BVF-77/77CE 7-inch B/W

Viewfinder.

• 3 output lines (composite video or SDI can be selected as

the output signal) are provided.

• 3 SDI output lines are provided (available only when

SDI signal output is selected for the VBS/SDI-1

connector).

• The CCU-790/790P supports communications between

the video camera and the CCU-790/790P over either a

triax cable or coaxial cable. (Power, however, is not

supplied to the video camera in the case of coaxial

cable.)

• When a video camera equipped with the AC OUT

connector is connected to the CCU-790/790P, the video

camera can supply power which is supplied from the

CCU-790/790P to an external device through the AC

OUT connector. This can be done by the setting on the

video camera.

For details, refer to the Operation Manual supplied with

the video camera.

10-MHz, wideband triax transmission

• Wideband triax transmission with Y signal at 10 MHz,

R-Y and B-Y signals at 6 MHz is used for inputting

video signals from the video camera. The triax cable

length can be extended from 50 to 1,000 m (with

Fujikura φ8.5 mm cables), 75 to 1,500 m (with BELDEN

9232 φ13.2 mm cables), or 100 to 2,000 m (with

Fujikura φ14.5 mm cables).

• The CCU-790/790P supports teleprompter signal

transmission. Teleprompter signals can be transferred

over distances of 50 to 500 m (with Fujikura φ8.5 mm

cables), 75 to 750 m (with BELDEN 9232 φ13.2 mm

cables), or 100 to 1,000 m (with Fujikura φ14.5 mm

cables).

Overview

Rack mountable

The CCU-790/790P is three-units high and can be

mounted in a 19-inch EIA standard rack.

For details on the rack mounting, refer to the System

Manual.

Note

Production of some of the peripherals and related devices

described in this manual has been discontinued. For advice

about choosing devices, please contact your Sony dealer or

a Sony sales representative.