Cisco TelePresence System C20 Plus Podręcznik dla początkujących - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik dla początkujących dla System konferencyjny Cisco TelePresence System C20 Plus. Cisco TelePresence System C20 Plus 32 stron. Telepresence conference system
Również dla Cisco TelePresence System C20 Plus: Podręcznik użytkownika (44 strony), Podręcznik dla początkujących (35 strony), Podręcznik dla początkujących (46 strony)

Drukuj stronę
Cisco TelePresence System C20 Plus Podręcznik dla początkujących
Profile Series, Codec C Series and Quick Set C20 / C20 Plus
Contents
Introduction
5
Add the system to the network
Contact your system administrator, or service provider, for information
about the network settings:
•
For H.323 calls, this will include system name, H.323 alias, gatekeeper
address, etc.
•
For SIP calls, similar types of information will be supplied.
•
For networks administered through Cisco TMS (Cisco TelePresence
Management Suite), your Cisco TMS administrator will help you to get
online.
The H.323 profile and SIP profile are configured from the Advanced
configuration menu:
•
Go to Settings > Administrator settings > Advanced configuration
and search for H323 or SIP, or select H323 > Profile 1 or SIP > Profile
1 from the menu.
•
Expand the items you want to edit and enter the required information. If
in doubt, contact your system administrator or your service provider.
Configure the H.323 Profile in the
Advanced configuration menu
ADVANCED CONFIGURATION
Search
Audio
+
Cameras
+
Conference 1
+
Experimental
+
GPIO
+
_
H323
NAT
+
_
Profile 1
H323Alias
+
CallSetup
+
Gatekeeper
+
Authentication
+
PortAllocation: Dynamic
Network 1
+
NetworkServices
+
Profile Series, Codec C Series and Quick Set C20/C20 Plus Getting Started Guide TC4.1, Feb 2011.
D14639.03
Copyright © 2010-2011 Cisco Systems, Inc. All rights reserved.
Configure your system
Configure your system
Operating devices
Configure the SIP Profile in the
Advanced configuration menu
ADVANCED CONFIGURATION
Search
Phonebook
+
Provisioning
+
_
SIP
_
Profile 1
DefaultTransport: Auto
TlsVerify: Off
Type: Standard
Outbound: Off
Proxy 1
+
Proxy 2
+
Proxy 3
+
Proxy 4
+
Authentication
+
Security
+
The menu system
6
Verify your settings
Verify the settings by reviewing the System Information page.
1.
Go to Settings > System Information
2.
Verify the previous configurations.
•
If you successfully registered to a Gatekeeper the
show Registered. If the registration failed the
registered.
•
If you successfully registered to a SIP server the
Registered. If the registration failed the
registered.
3.
Press Home (
) to exit.
7
Adjust the date and time settings
Check that the date and time settings are correct. The date and time are
located in the upper right corner of the screen.
To adjust the date and time settings:
1.
Go to Settings > Date and time
2.
When Set date and time is set to Auto there will be an automatic
update of the date and time settings. If you want to manually adjust
the date and time settings, select Manual and enter the Day, Month,
Year and Time. After having adjusted the settings manually, you can
set the Set date and time back to Auto for automatic update.
3.
Select the appropriate Time zone from the list of GMT time zones.
4.
Select the appropriate Date format from the list.
5.
Select the appropriate Time format from the list.
6.
Press Home (
) to exit.
7
Getting started guide
The web interface
Password protection
Status
will
Status
will show Not
Status
will show
Status
will show Not
www.cisco.com