Cisco TelePresence VX Clinical Assistant Instrukcja instalacji i obsługi - Strona 15
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla System konferencyjny Cisco TelePresence VX Clinical Assistant. Cisco TelePresence VX Clinical Assistant 33 stron. Mobile video system
Drukuj stronęInstalling Options
Retractable AC Cord Caddy
This option is available for North America ONLY.
1. Insert the MOUNTING BRACKETS to the side of the
SUPPORT COLUMN as shown.
2. Position the RETRACTOR HOUSING to fit the flanges
over the screws of the MOUNTING BRACKETS.
3. Secure the RETRACTOR HOUSING with the
FASTENING KNOBS.
4. Remove the existing power cord by unscrewing the
CORD STRAIN RELIEF and replace with the power
cord from the rear of the RETRACTOR HOUSING.
5. Secure the CORD STRAIN RELIEF over the power
cord with an appropriate amount of slack.
6. Pull and plug the retractable cable into an
appropriate outlet to provide AC power to the
system.
To retract the power cord, unplug from outlet, gently
tug on cable to retract into the housing.
Retractable Network Cord Caddy
This option installs similarly as the AC Cord Caddy
option. Once it is mounted to the cart:
1. Connect the loose end of the cable to the
NETWORK port on the rear of the cart. If using an
optional switch, connect to the switch instead.
2. Connect the retractable end of the cable to an
appropriate network source.
141299.21 Cisco TelePresence VX Clinical Assistant
FASTENING
KNOBS (2x)
TO OUTLET
6
TM
CTS-CA2-K9/CTS-CA2-P240V-K9 v1.2 | 2013 JAN | © 2012-2013 Cisco Systems, Inc. All rights reserved.
3
RETRACTOR
HOUSING
2
MOUNTING
BRACKETS
SUPPORT
COLUMN
1
CORD
5
STRAIN
RELIEF
TO IEC INLET
4
15