Cisco UC 520 Instrukcja konfiguracji - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja konfiguracji dla System konferencyjny Cisco UC 520. Cisco UC 520 19 stron. Unified communications 500 series ip pbx setup guide
Drukuj stronę
Cisco Unified Communications 500 Series
DISCLAIMER
The attached document is provided as a basic guideline for setup and configuration of Cisco
Unified Communications 500 Series IP PBX systems with MegaPath's SIP Trunking service,
based on MegaPath's testing and validation process. It does not include advanced
configurations to enable features such as voicemail, Find-Me-Follow-Me, etc. MegaPath is
not responsible for customer IP PBX configurations. For more information on advanced
features, please refer to your IP PBX documentation.
OVERVIEW
Cisco Unified Communications 500 series IP PBX (www.cisco.com) is an "all-in-one"
converged IP PBX solution featuring built-in PBX functionality, voicemail, SIP gateway, IP
router, Gigabit uplinks, Power of Ethernet (PoE) ports, Firewall, VPN, and DSU/CSU. The
steps outlined in this guide reflect the process used by MegaPath to successfully configure
MegaPath's SIP trunks on the described software/hardware versions only.
SUPPORTED HARDWARE MODELS
The following hardware models are interoperable and described with this setup guide:
Cisco UC 520
Cisco UC 540
Cisco UC 560
SUPPORTED SOFTWARE DEPLOYMENTS
The following software deployments are interoperable and described with this setup guide:
•
Cisco Configuration Assistant: v3.0
•
Cisco Software Pack: v8.1.0
•
Cisco IOS: (UC500-ADVIPSERVICESK9-M), v15.1(2)T2
•
System Bootstrap ROM: v12.4 (11r)XW3
REQUIRED INFORMATION
The following software deployments are supported with this setup guide:
Maximum Channels __________________________________________________
Host ______________________________________________________________
Username _________________________ Password ________________________
Page 2