Argo LUDVIG Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Klimatyzator Argo LUDVIG. Argo LUDVIG 20 stron.

Open the windows and lock one of the two leaves with the handle. Place the end fitting against the fixed leaf of the

window,and draw the other leaf towards it

USE WITH WINDOW UNIT KIT

1. To make the hole in the glass it is advisable to take the porthole kit accessory to the glazier (Fig. 1).

2. Insert the window unit into the window (Fig. 2).

3. Insert the round fitting into the retractable flexible pipe and insert the latter with its round fitting into the window

unit without the plug (Fig. 3).

4. Insert the round fitting onto the flexible pipe (Fig. 4).

5. Insert the flexible pipe thus mounted into the rear of the air conditioner.

(Fig. 1)

(Fig. 2)

(Fig. 3)

(Fig. 4)

Connect the power cord to a suitable electric socket (220-240 V). Insert the supplied batteries into the remote control

and make sure the poles match. Select the desired operating mode from the remote control.

Avoid tight bends or folds in the hose.

If the air conditioner is not used for prolonged periods, disconnect the pipe and plug the window unit.

V 04/23