Argo ORION PLUS Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Klimatyzator Argo ORION PLUS. Argo ORION PLUS 18 stron. Portable air conditioner (local)
Również dla Argo ORION PLUS: Instrukcja obsługi (16 strony)

Argo ORION PLUS Instrukcja obsługi
The temperature cannot be adjusted.
This appliance automatically vaporises condensate in the cooling mode.
When the air conditioner operates in cooling mode, there is no need to drain condensate continuously; only in certain
weather conditions with very humid air may it occur that water deposits inside the unit. When its inner tank is full, the
air conditioner beeps 8 times and the message "FL" appears on the display to signal that the tank is full and stop
the appliance's operation.
Dehumidification
WARNING!
When using the air conditioner in dehumidification mode, we recommend always ensuring continuous drainage, in order
to maximise dehumidification efficiency.
Use the drainage outlet on the appliance. The water can be drained into a drain by simply connecting the supplied
drainage tube.
1.
Remove the cap by turning it anti-clockwise then
remove the plug.
3. Avoid bends in the drainage tube.
V 01/19
HOW TO ELIMINATE CONDENSATE
Cooling
When the unit operates in the cooling mode, ensure that the rubber cap
closing the drainage opening on the back of the appliance is properly
positioned.
To empty the container, switch the air conditioner off and unplug the
cord. Remove the cap from the rear drainage opening and place its end
over a normal drain. Ensure that the tube is not twisted or bent. The tube
must slope downwards. Re-close the drainage opening with the cap,
insert it into the clamp and resume use of the air conditioner.
.
2
Next, insert the drainage tube into the connection tube.
28