Argo POLIFEMO BEAR Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Klimatyzator Argo POLIFEMO BEAR. Argo POLIFEMO BEAR 9 stron. Evaporative air cooler

Cleaning the dust filter and the honeycomb filter

Remove the filter assembly by detaching it from the unit by pressing on the opening hook. Once removed, gently remove the

honeycomb filter by sliding it under the hooks, remove the dust filter, always sliding it off the hooks. To assemble again,

insert the dust filter in its holder and then insert the honeycomb filter.

Make sure all components are perfectly dry and properly installed to avoid damaging them.

Cleaning the water tank

1.Rotate the locking hook of the water tank in the horizontal direction, see Pic.1.

2.Remove the tank following the direction of the arrow as shown in Pic. 2 to have a space for disassembling the pump.

3. Remove the water pump from the tank by pressing the 2 tabs positioned on the pump (Pic.3), then completely remove the

tank for cleaning.

4.For descaling of the water tank, pour in water and vinegar or an anti-limescale product, leave it on for a sufficient time and

rinse with water, then use a soft, dry cloth to clean it.

5. Reposition the water tank without forgetting to put the pump back into the tank by pressing again on the two tabs positioned

on the pump, then hooking it to the tank.

It is recommended to clean the water tank weekly.

STORAGE

If the appliance is not used for prolonged periods, disconnect the power cord and store the appliance with this manual in its

original packaging, in a cool and dry place.

Before packaging, the honeycomb filter and dust-proof filter should be dry, and there is no water in the tank.

V 02/22

Pic.1

Pic.2

Pic.3