Argo POLIFEMO BILLY Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Klimatyzator Argo POLIFEMO BILLY. Argo POLIFEMO BILLY 9 stron. Evaporative air cooler

WARNING: ALWAYS UNPLUG THE APPLIANCE BEFORE CLEANING OR MAINTENANCE

PROCEDURES.

IMPORTANT: DO NOT SUBMERGE THE PRODUCT IN WATER

Cleaning the outside surface of the appliance

Use a soft cloth to remove any dust from the product.

If this is not enough, use a soft cloth dampened with water and a mild detergent at a temperature not exceeding 50°C. Let the

appliance dry completely before using it.

Do not use corrosive detergents or solvents such as petrol. Do not wash the appliance with water.

substances or other items that may damage the surface to clean it.

Use a vacuum cleaner to remove dust from the air inlet/outlet grilles.

Cleaning the dust filter, the cooling panel and the tank

Clean the dust filter frequently, at least once a month.

Remove the dust filter by pulling the knob on the cooling panel, as indicated in the diagram below.

STORAGE

If the appliance is not used for prolonged periods, disconnect the power cord and store the appliance with this manual in its

original packaging, in a cool and dry place.

Before packaging, the honeycomb filter and dust-proof filter should be dry, and there is no water in the tank.

INFORMATION FOR THE CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH

EUROPEAN DIRECTIVE 2012/19/EU

This appliance may not be scrapped with domestic waste at the end of its life cycle. We call your attention to the crucial role

played by the consumer in the re-use, recycling and other forms of recovery of such waste.

The appliance must be scrapped by a sorted waste disposal centre or by returning it to the retailer (no charge is levied for this

service), when you purchase a new equivalent appliance.

Sorted disposal of electric and electronic equipment prevents the negative effects on the environment and human health

resulting from improper scrapping, and also allows the materials from which it is made to be recovered and recycled, with

significant savings in terms of energy and resources. The sorted disposal requirement is indicated by the crossed waste bin

label affixed to the appliance.

V 12/18

MAINTENANCE AND STORAGE

www.argoclima.com

Clean the dust filter using a soft brush or a vacuum cleaner, and

wash it in a solution of water and mild detergent.

Remove the cooling panel at the same time and soak it in a

solution of water and mild detergent.

Take out the tank and rinse it under running water, removing any

residue.

Let the filter, the panel and the tank dry completely after washing

them; then

re-fit the components in the following order: water

tank, cooling panel and dust filter.

Do not use oils, chemical