Argo POLIFEMO CLASS Instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Klimatyzator Argo POLIFEMO CLASS. Argo POLIFEMO CLASS 11 stron. Evaporative air cooler
Również dla Argo POLIFEMO CLASS: Instrukcja obsługi (6 strony)
Drukuj stronę
THE TANK MUST BE FILLED WITH DEMINERALIZED WATER FOR THE APPLIANCE TO
OPERATE IN COOLER/HUMIDIFIER MODE.
Water tank
locked
Counter-rotate the tank knob by 90° and remove it from its slot; fill it with demineralized water, up to the maximum level mark.
Reposition the tank and turn the knob.
If you wish to keep the water in the tank below room temperature in order to maximise cooling in warmer months, leave one of
the two synthetic ice packs supplied in the freezer until solid, then add it to the water in the tank.
The ice will absorb heat from the water.
We recommend continuous use of the ice for optimal cooling capacity.
The first time it is used, you may detect a smell or the water may turn an unusual colour: this does
not consititute a health risk.
WARNING: ALWAYS UNPLUG THE APPLIANCE BEFORE CLEANING OR MAINTENANCE
PROCEDURES.
IMPORTANT: DO NOT SUBMERGE THE PRODUCT IN WATER
Cleaning the outside surface of the appliance
Use a soft cloth to remove any dust from the product.
If this is not enough, use a soft cloth dampened with water and a mild detergent at a temperature not exceeding 50°C. Let the
appliance dry completely before using it.
Do not use corrosive detergents or solvents such as petrol. Do not wash the appliance with water.
substances or other items that may damage the surface to clean it.
Use a vacuum cleaner to remove dust from the air inlet/outlet grilles.
Cleaning the dust filter, the cooling panel and the tank
Clean the dust filter frequently, at least once a month.
Remove the dust filter by pulling the knob on the cooling panel, as indicated in the diagram below.
V 12/16
FILLING THE WATER TANK
Water tank
unlocked
MAINTENANCE AND STORAGE
Water tank
pulled out
Filling water
Do not use oils, chemical
19