Cisco 15530-LCMB-0200 - ESCON Multiplexing Line Card Multiplexor Instrukcja instalacji sprzętu - Strona 25

Przeglądaj online lub pobierz pdf Instrukcja instalacji sprzętu dla Sprzęt sieciowy Cisco 15530-LCMB-0200 - ESCON Multiplexing Line Card Multiplexor. Cisco 15530-LCMB-0200 - ESCON Multiplexing Line Card Multiplexor 36 stron. User guide

Drukuj stronę

Chapter 2

Installing the Cisco ONS 15530

Attach the appropriate cables.

Step 4

Check the LEDs to ensure proper installation.

Step 5

Installing OSC Modules, WB-VOA Modules, and PB-OE Modules

Up to two OSC modules can be installed in the carrier motherboard, one module for the west direction

and one for the east direction. The WB-VOA module and PB-OE module are also installed in the carrier

motherboard.

To install the OSC module, the WB-VOA module, or the PB-OE module, follow these steps:

Disconnect all optical fiber connections from the WB-VOA and PB-OE modules.

Step 1

Remove the module or the filler module from the carrier motherboard.

Step 2

Step 3

Take a new module from the shipping container.

Step 4

Insert the module carefully into the carrier motherboard (see

and lower edges of the module in the tracks until its connectors come into contact with the backplane

connectors. Place the module locking lever in place, and then use a number 1 Philips screwdriver to

tighten the module locking lever.

OL-7706-01

Installing and Removing Modules

Figure

2-19) slot while guiding the upper

Cisco ONS 15530 Hardware Installation Guide

2-25