Cisco 2100 Series Podręcznik konfiguracji - Strona 13
Przeglądaj online lub pobierz pdf Podręcznik konfiguracji dla Sprzęt sieciowy Cisco 2100 Series. Cisco 2100 Series 40 stron. Cisco 8500 series
wireless lan controller
Również dla Cisco 2100 Series: Skrócona instrukcja obsługi (49 strony), Podręcznik konfiguracji (50 strony), Skrócona instrukcja obsługi (12 strony)
![Cisco 2100 Series Podręcznik konfiguracji](/uploads/products/server2/572087/572087.jpg)
Section 1: SVP
PN: 1725-36192-001_H
Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs
Global settings for
were not tested. For
Assignment
settings please consult your facility's RF site survey — optimized for
wireless voice traffic — to determine correct power and channel
settings for each AP using only channels
4. Set
to
Admin Status
5. Configure any other settings that might be relevant to your
deployment as needed.
6. Click the
button to save all changes.
Apply
Screenshot for 1100, 1130, 1200, 1230 and 1240 series access points:
Screenshot for 1140 and 1250 series access points:
7. In the navigation pane under
8. Set
802.11b/g Network Status
after setting radio parameters.
For setting up the
survey, designed for voice traffic, to determine if you have sufficient
coverage to support all data rates. SpectraLink Wireless
Telephones require the following minimum dBm reading to support
the corresponding
RF Channel Assignment
Custom Tx Power
.
Enable
802.11b/g/n
to
. The radio will be re- enabled
Disable
please consult your facility's RF site
Data Rates,
data rate setting in the access point.
Mandatory
and
Tx Power Level
and
RF Channel
,
and
.
1
6
11
, click
.
Network
13