ACU-RITE 00276TX Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe ACU-RITE 00276TX. ACU-RITE 00276TX 7 stron. Room monitor

Drukuj stronę

SETUP

Room Monitor Setup

Install or Replace Batteries

Batteries MUST be installed for

this product to operate. AcuRite

recommends high quality alkaline

batteries for the best product

performance. Heavy duty or

rechargeable batteries are not

recommended.

1. Twist off the battery

compartment cover.

2. Insert 2 x AA batteries into

the battery compartment, as

shown. Follow the polarity

(+/-) diagram in the battery

compartment.

3. Replace the battery cover.

Install Batteries

2 AA Batteries

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE

WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.

BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to

be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of

used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries

af Új]$ Yk ZYll]ja]k eYq ]phdg\] gj d]Yc& <G FGL eap gd\ Yf\ f]o ZYll]ja]k gj lqh]k g^ ZYll]ja]k YdcYdaf]'klYf\Yj\!& <G FGL mk] j][`Yj_]YZd] ZYll]ja]k& <G FGL

recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.

Ojal] <gof l`] Egfalgj k A<

After batteries are installed,

a unique 6-digit alphanumeric

B= Zii^Zkl hg ma^ ]blieZr

momentarily. It can also be found

printed on the back of the Room

Fhgbmhk' Mabl ngbjn^ B= fZr

be referenced for connectivity

functions.

B=3

Ojal] <gof Egfalgj k A<

/ ]b`bm ZeiaZgnf^kb\ B=

Placement for Maximum Accuracy

AcuRite products are sensitive to surrounding environmental conditions. Proper

placement of the Room Monitor is critical to the accuracy and performance of

the product.

Room Monitor Placement

The Monitor is designed for indoor use. Place the Monitor in

a dry area free of dirt and dust. Monitor stands upright for

tabletop use or is wall-mountable.

Important Placement Guidelines

• Monitor must be within 330 feet (100 meters) of a companion unit

(optional; sold separately).

MAXIMIZE WIRELESS RANGE

Place units away from large metallic items, thick walls, metal surfaces, or other

objects that may limit wireless communication.

PREVENT WIRELESS INTERFERENCE

IeZ\^ [hma ngbml Zm e^Zlm , _^^m !2) \f" ZpZr _khf ^e^\mkhgb\ ]^ob\^l !MO%

computer, microwave, radio, etc.).

LOCATE AWAY FROM HEAT SOURCES

To ensure accurate temperature measurement, place Monitor out of direct

sunlight and away from any heat sources.

LOCATE AWAY FROM HUMIDITY SOURCES

To ensure accurate humidity measurement, locate Monitor away from humidity

sources. Avoid installing the Monitor near indoor pools, spas, or other bodies

of water. Water sources may impact humidity accuracy.