Argo BETSY Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Grzałka Argo BETSY. Argo BETSY 9 stron.

soapy water. Always remove the plug from the mains socket before

cleaning.

 To disconnect the quartz heater, use both buttons by placing them

in the position 0 and remove the plug from the socket. Pull on the

plug only. Avoid pulling on the cord when disconnecting the quartz

heater.

 Do not place any objects on the cord and do not bend it.

 It is not advisable to use extension cords, as these may overheat

and cause the risk of fire. Do not use a single extension cord to

operate multiple appliances.

 Do not immerse the cord, plug or any other element of the appliance

in water or other liquids.

 Do not touch the plug with wet hands.

 Do not place the quartz heater above or near another heat source.

WARNING: AVOID COVERING THE QUARTZ HEATER TO

PREVENT IT FROM OVERHEATING.

The symbol below signals the above warning:

 The quartz heater may cause the risk of fire if, while in operation, is

covered by or comes into contact with inflammable material

including curtains, drapery, blankets, etc. KEEP THE QUARTZ

HEATER AWAY FROM THESE MATERIALS.

 Do not connect the appliance to the mains power before it has been

properly assembled and positioned.

 Do not run the cord under carpets. Do not cover the cord with

blankets, carpets or similar materials. Place the cord far away from

busy areas or where it cannot be accidentally pulled-out.

 Do not operate the quartz heater in close proximity to bathtubs,

showers, washbasins or pools.

 No not use the appliance in the bathroom.

V 04/21