Argo BETSY Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Grzałka Argo BETSY. Argo BETSY 9 stron.

Connect the power cord to a suitable electric socket (230V~/50-60Hz).

Press the power button I (600W) or I + I (1200W) upwards. To turn off the quartz heater, press the button (or

both buttons) again downwards, which will be in position 0.

Disconnect the power cord when the quartz is not in use.

The appliance is fitted with an anti tip-up device that prevents it from operating when it detects that the product

is inclined.

Do not position the appliance on its side or upside down.

CAUTION: ALWAYS UNPLUG THE APPLIANCE BEFORE CLEANING OR MAINTENANCE OPERATIONS.

IMPORTANT: DO NOT IMMERSE THE QUARTZ HEATER IN WATER.

Cleaning the outside surface of the appliance

Use a soft cloth to remove any dust from the quartz heater.

If the quartz heater is excessively dirty, use a soft cloth dampened with water and neutral detergent at a

temperature below 50°C. Leave the quartz heater to dry completely before using it again.

Do not use corrosive detergents or solvents such as petrol. Do not wash the appliance with water.

cleaning the appliance, do not use oils, chemical substances or other items that may damage the surface.

Use a vacuum cleaner to remove dust from the air inlet/outlet grilles.

STORAGE

If the appliance is not used for prolonged periods, it must be stored together with this manual in its original

packaging, in a cool and dry place

V 04/21

HOW TO USE THE QUARTZ HEATER

MAINTENANCE AND STORAGE

When