Cisco 7246 - uBR Router Podręcznik uzupełniający - Strona 35
Przeglądaj online lub pobierz pdf Podręcznik uzupełniający dla Sprzęt sieciowy Cisco 7246 - uBR Router. Cisco 7246 - uBR Router 42 stron. 7200 series port adapter hardware configuration guidelines
Również dla Cisco 7246 - uBR Router: Konfigurowanie (28 strony), Podręcznik użytkownika (7 strony)
Drukuj stronę
Memory Requirements
Depending on the circumstances, you might need to determine the amount of main memory (DRAM or
SDRAM) required by your Cisco 7200 series router to support a combination of installed port adapter
types and a specific Cisco IOS software subset image.
The NPE-175, NPE-225, NPE-300, and NSE-1 use SDRAM DIMMs for main memory, whereas the
Note
NPE-100, NPE-150, and NPE-200 use DRAM SIMMs for main memory.
The NPE-400 uses a single SDRAM SODIMM for main memory.
The NPE-G1 uses two SDRAM SODIMMs for main memory.
The NPE-G2 uses a single SDRAM DIMM for main memory.
This chapter contains the following sections:
Determining Port Adapter and System Memory Requirements, page 2-2
•
Sample Configuration Showing Processor Memory Required, page 2-2
•
•
Cisco IOS Software Memory Requirements, page 2-4
•
Determining DRAM or SDRAM Required If the Router Has Only 32 MB of Memory (NPE-100,
NPE-150, and NPE-200), page 2-5
•
SDRAM and DRAM Options for NPEs and the NSE, page 2-6
OL-3875-11
C H A P T E R
Cisco 7200 Series Port Adapter Hardware Configuration Guidelines
2
2-1