Cisco 7507 Skrócona instrukcja obsługi - Strona 41

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt sieciowy Cisco 7507. Cisco 7507 44 stron. Air filter and chassis blower replacement
Również dla Cisco 7507: Instrukcja instalacji (39 strony), Arkusz danych (11 strony), Instrukcja wymiany (21 strony)

Drukuj stronę

Install Field Replaceable Units (FRUs)

Remove and Replace the Power Supply

Redundant power supplies support online insertion and removal (OIR); if you remove one power supply, the

second power supply immediately ramps up to maintain uninterrupted operation. In this case, proceed to Step 2.

If you have only one power supply, you must turn off power before removing and replacing it. In this case,

proceed to Step 1.

Step 1

Turn off the power source.

Step 2

Turn off the switch on the power supply.

Step 3

Disconnect the power cable from the power source.

Step 4

Disconnect the power cable from the power supply.

For the AC-input power supply: Lift up the cable retention clip and remove the power cable from the

AC power receptacle.

Captive

installation

screw

LEDs

AC power

receptacle

On/off switch

Powe

front

Locking device