Cisco 7507 Skrócona instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt sieciowy Cisco 7507. Cisco 7507 44 stron. Air filter and chassis blower replacement
Również dla Cisco 7507: Instrukcja instalacji (39 strony), Arkusz danych (11 strony), Instrukcja wymiany (21 strony)

Drukuj stronę

Install the Hardware

Install the Router

Note

To rack-mount the router, refer to the

"Rack-Mount the Router (Optional)" section on

page 4.

Caution

Two people are required to

perform this step. Avoid sudden twists or

moves to prevent injury.

Step 1

With a person positioned at either side of

the chassis, grasp the bottom edge of the

chassis with one hand near the front and

the other near the back. Slowly lift the

chassis in unison. Place the chassis on a

bench or tabletop where the air intake

vent on the front of the chassis is not

drawing in exhaust air from other

equipment.

Step 2

Ensure that you have at least 3 or 4 feet

(0.91 to 1.22 m) of clearance around the

rear of the chassis to install power

supplies and perform maintenance on the

chassis.

Step 3

Proceed to the "Install Interface

Processors, Fillers, VIPs, or RSPs" section

on page 10.