Sony Alpha 7RV Instrukcja uruchamiania

Przeglądaj online lub pobierz pdf Instrukcja uruchamiania dla Aparat cyfrowy Sony Alpha 7RV. Sony Alpha 7RV 2 stron. Interchangeable lens digital camera

Drukuj stronę

Interchangeable Lens Digital Camera

E-mount

Startup Guide

ILCE-7RM5

We use environmentally conscious packaging materials

Environmentally conscious packaging materials were used for the camera and

supplied accessories.

Note the following due to the characteristics of the packaging materials.

• Powder, etc. from the packaging materials may adhere to the camera or

supplied accessories. In this case, remove it with a commercially available

blower or cleaning paper before use.

• The packaging materials will deteriorate with continuous use. Be careful when

carrying the product by the packaging.

About the manual for this camera

"Help Guide" (Web manual)

https://rd1.sony.net/help/ilc/2230/h_zz/

ILCE-7RM5 Help Guide

This guide describes the necessary preparations to start using the

product, basic operations, etc. For details, refer to the "Help Guide"

(web manual).

Preparations

Checking the supplied items

The number in parentheses indicates the number of pieces.

• Camera (1)

• USB Type-C® cable (1)

• Battery charger (1)

• Shoulder strap (1)

• Power cord (mains lead) (1)*

• Body cap (1) (attached to the camera)

(supplied in some countries/regions)

• Cable protector (1)

* Multiple power cords may be

• Shoe cap (1) (attached to the camera)

supplied with this equipment. Use the

• Eyepiece cup (1) (attached to the

appropriate one that matches your

camera)

country/region. See "Notes on use."

• Startup Guide (this manual) (1)

• Rechargeable battery pack NP-FZ100

• Reference Guide (1)

(1)

Preparing the battery pack

5-043-817-12(1)

Insert the battery pack into the battery

charger, and connect it to a wall outlet (wall

socket) using the power cord (supplied).

• Place the battery pack on the battery charger in

the direction of . Slide the battery pack in the

direction of the arrow as far as it will go.

• When charging starts, the CHARGE lamp on the

battery charger will light up. When charging is

finished, the CHARGE lamp and all indicators turn

off.

Insert the battery pack into the camera.

• Open the battery cover, and then insert the

battery pack while pressing the lock lever.

Inserting a memory card into the camera

You can use CFexpress Type A memory cards and SD memory cards with this

camera.

Open the memory card cover and insert the memory card into Slot 1.

• Both Slot 1 and Slot 2 support CFexpress Type A memory cards and SD memory

cards.

• Insert a CFexpress Type A memory card with the label facing the monitor, and an

SD memory card with the terminal facing the monitor. Insert the card until it clicks

into place.

• You can change which memory card slot to use by selecting MENU 

(Shooting)  [Media]  [

[

Recording Media].

The Slot 1 is used in the default settings.

Hint

• When you use a memory card with the camera for the first time, it is recommended that you

format the card on the camera for more stable performance of the memory card.

Attaching a lens

Remove the body cap from the camera and

the rear lens cap from the rear of the lens.

Mount the lens by aligning the two white

index marks (mounting indexes) on the lens

and camera.

While pushing the lens lightly toward the

camera, turn the lens slowly in the direction

of the arrow until it clicks into the locked

position.

Performing initial setup for the camera

By establishing a Bluetooth connection (pairing) between the camera and a

smartphone, you can perform initial camera setup such as date and time settings

from the smartphone. Install the dedicated application on your smartphone in

advance, and then follow steps 1 to 4 under "Procedures for initial camera setup."

Installing the dedicated smartphone application

Install the application from the following website. Also, update to

the latest version of the dedicated application. The specifications

of the dedicated application may change without notice.

https://www.sony.net/ca/

CHARGE lamp

To a wall outlet

(wall socket)

Lock lever

Slot 1 Slot 2

Rec. Media Settings]  [

Recording Media] or

Mounting indexes

Procedures for initial camera setup

ON/OFF (Power)

switch

Control wheel

Select items : //// /

Confirm : Center button

Set the ON/OFF (Power) switch to "ON" to turn on the camera.

Select the desired language and then press the center of the control

wheel.

• The privacy notice screen will appear. Read the privacy notice regarding

biometrics by opening the link using your smartphone, etc.

Press the center of the control wheel.

Follow the instructions on the camera screen to connect the camera with

your smartphone and perform the initial setup.

• You can also configure or change the initial settings later from the MENU of the

camera.

Connecting (pairing) the camera with your smartphone later

For details on the connection method, refer to the following

Help Guide URL:

https://rd1.sony.net/help/ilc/2230_pairing/h_zz/

Shooting

Shooting still images

Turn and set the Still/Movie/S&Q dial to

(Still) while pressing the lock release button

on the front of the Still/Movie/S&Q dial.

Turn the mode dial while pressing the mode

dial lock release button in the center of

the mode dial, and then select the desired

shooting mode.

Press the shutter button halfway down to

focus.

Press the shutter button all the way down.

Shooting movies

Turn and set the Still/Movie/S&Q dial to

(Movie) while pressing the lock release

button on the front of the Still/Movie/S&Q

dial.

Turn the mode dial while pressing the mode

dial lock release button in the center of

the mode dial, and then select the desired

shooting mode.

Press the MOVIE (Movie) button to start

recording.

Press the MOVIE (Movie) button again to stop

recording.

Hint

• The start/stop movie recording function is assigned to the MOVIE (Movie) button

in the default settings. Even without switching shooting modes in Step 1, you

can start movie recording from still image shooting mode by pressing the MOVIE

(Movie) button.

Mode dial

Shutter button

Still/Movie/S&Q dial

Mode dial

MOVIE (Movie)

button

Still/Movie/S&Q dial