Cisco ACIP-SM= Instrukcja instalacji i konfiguracji - Strona 31
Przeglądaj online lub pobierz pdf Instrukcja instalacji i konfiguracji dla Sprzęt sieciowy Cisco ACIP-SM=. Cisco ACIP-SM= 33 stron. Atm cable interface processor (acip)
Drukuj stronę
Error Message
atm_pakalign(ATM2/0): Invalid VC(65535) received, type=0xaaaa
A packet was received by the ACIP with a VC that is out of the valid range of VCs.
Explanation
Error Message
atm_pakalign(ATM2/0): VC(1) NOT configured, type=0xaaaa
Explanation
A packet was received by the ACIP for which a VC is not configured.
Error Message
ATM(ATM2/0): Encapsulation error, link=0xaaaa, host=0xaaaa
Explanation
The ATM software failed to encapsulate a protocol because the protocol/address are
not in a STATIC map table.
Error Message
ATM(ATM2/0: Encapsulation error, VC=1 not connected
A static map exists for the protocol address, but the VC has not been configured.
Explanation
Error Message
ATM(ATM2/0): VC(1) Bad SAP received
A packet with a bad SNAP encapsulation was received.
Explanation
Error Message
ATM(ATM2/0): Bad VC(1) encapsulation configured
An internal error has occurred. Check the VC encapsulation.
Explanation
ATM Cable Interface Processor (ACIP) Installation and Configuration
Examples of ATM Error Messages
31