Cisco AIR-WLC2106-K9 - Wireless LAN Controller 2106 Skrócona instrukcja obsługi - Strona 14
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt sieciowy Cisco AIR-WLC2106-K9 - Wireless LAN Controller 2106. Cisco AIR-WLC2106-K9 - Wireless LAN Controller 2106 49 stron. Wireless lan controllers
Również dla Cisco AIR-WLC2106-K9 - Wireless LAN Controller 2106: Arkusz danych (4 strony)
Drukuj stronę
Press the hyphen key if you need to return to the previous command line.
Note
Table 1
Startup Wizard Information
Wizard Setting
System Name
Administrative user name
Administrative user password
Management Interface IP Address
Management Interface Netmask
Management Interface Default Router
Management Interface VLAN Identifier
Management Interface Port Number
Management Interface DHCP Server IP Address
14
Action
Enter the system name, which is the name you
want to assign to the controller. You can enter up
to 32 ASCII characters.
Enter the administrative username and password
to be assigned to this controller. You can enter up
to 24 ASCII characters for each.
The default administrative username and
password are both admin and admin.
Enter the IP address of the management interface.
The management interface is the default interface
for in-band management of the controller and
connectivity to enterprise services such as AAA
servers.
You can access the controller's GUI interface
using this address.
Enter the IP address of the management interface
netmask.
Enter the IP address of the default router.
Enter the VLAN identifier of the management
interface (a valid VLAN identifier or 0 for an
untagged VLAN).
The VLAN identifier should be set to match the
switch interface configuration.
Enter the port number of the access point
manager interface.
Enter the management interface DHCP server IP
address.