Argo Kobra +2SS7 Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Niszczarka do papieru Argo Kobra +2SS7. Argo Kobra +2SS7 17 stron.

in order to facilitate emptying bins, the paper bin (2) comes with a transparent blue win-

dow on the front for checking the level of shredded paper as well as cDs, DVDs and credit

cards in the two separate bins.

UsInG the MAChIne

Once the machine has been plugged in, put the button (a) in the "FWD" position, the ENErGY

sMarT light (B) will come on for a few seconds and then, if the machine is not in use, it will

switch off while the machine remains on sTaND-BY at zero power consumption.

Now documents can be shredded at any time.

When the button (a) is at "0" all functions are switched off.

When button (a) is at "rEV", shredding of any kind of paper or cD, DVD or credit card may

be interrupted at any time and the document or data support removed from the machine.

This function is also possible when the light (B) is off.

• SHREDDING PAPER WHICH IS NOT CRUMBLED

insert sheets of paper through the slit on the front of either the kobra +2 or kobra +3

and the light (B) comes on (if off ). The machine then starts shredding automatically, ac-

tivated by two electronic eyes (c) located inside the slit. These detect the presence of

the paper and the machine automatically switches a few seconds after the paper has

been shredded.

if the paper inserted exceeds the shred capacity of the machine, the machine stops and

reverses the direction of the rollers for a few seconds before coming to a halt.

in order to restart the machine, simply flip up and open the transparent swinging cover

(D) and the hand guard flap (E).

remove all or some of the unshredded paper and simultaneously close the hand gu-

ard (E) and the swinging cover (D). The machine restarts automatically and finishes the

shredding with shred cycle lasting approx. 15/17 seconds.

• SHREDDING CRUMBLED PAPER

Only the kobra +3 models come with the special patented "Throw and shred" system

with an automatic feeder (F) for shredding even crumbled paper.

Open the transparent swinging cover (D), let the crumbled paper fall into the rear compart-

ment of the automatic feeder (F) and close the transparent swinging cover (D) again.

The shredder starts up automatically and stops after approx. 15/17 seconds.

IMPORTANT: ONLY INSERT ONE PIECE OF CRUMBLED PAPER AT A TIME.

if more than one sheet of crumbled paper is inserted at the same time, the machine co-

uld jam, go into automatic reverse and stop.

in order to unjam the machine:

Open the transparent swinging cover (D), raise the hand guard flap (E), remove the

crumbled paper from the shredding chamber and then close the hand guard and trans-

parent swinging cover again.

The machine will start up automatically for one cycle.

lasting approx. 15/17 seconds to free the cutting blades and ready the machine for new

shred cycles.

• S HREDDING CDs, DVDs and CREDIT CARDS CDs, DVDs and Credit Cards

can be shredded by kobra +2 and kobra +3 models. simply lift the transparent swinging