Cisco Aironet 1140 Series Podręcznik dla początkujących - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik dla początkujących dla Sprzęt sieciowy Cisco Aironet 1140 Series. Cisco Aironet 1140 Series 37 stron. Autonomous access point
Również dla Cisco Aironet 1140 Series: Podręcznik dla początkujących (35 strony), Podręcznik konfiguracji (40 strony), Arkusz danych (6 strony), Podręcznik dla początkujących (31 strony)

Command

interface bvi1

Step 2

ip address ip_address net_mask

Step 3

Assigning an IP Address Using the CLI

Follow these steps to access the CLI using a Telnet session. These steps are for a PC running Microsoft

Windows with a Telnet terminal application. Check your PC operating instructions for detailed

instructions.

Select Start > Programs > Accessories > Telnet.

Step 1

If Telnet is not listed in your Accessories menu, select Start > Run, type Telnet in the entry

field, and press Enter.

Step 2

When the Telnet window appears, click Connect and select Remote System.

In the Host Name field, type the access point IP address and click Connect.

Step 3

If you are connected to the access point using a Telnet session, you lose your connection to

Note

the access point when you assign a new IP address to the BVI. If you need to continue

configuring the access point using Telnet, use the new IP address to open another Telnet

session to the access point.

Purpose

Enters interface configuration mode for the

BVI.

Assigns an IP address and subnet mask

address to the BVI.