Cisco Aironet 340 Series Skrócona instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt sieciowy Cisco Aironet 340 Series. Cisco Aironet 340 Series 12 stron. Usb client adapter
Również dla Cisco Aironet 340 Series: Skrócona instrukcja obsługi (13 strony), Informacje o wersji (14 strony), Skrócona instrukcja obsługi (16 strony), Skrócona instrukcja obsługi (12 strony), Skrócona instrukcja obsługi (12 strony)
Drukuj stronę
5
When you receive a message indicating that Windows has finished the installation, click
Finish.
6
Remove the CD from your computer's CD-ROM drive.
7
Double-click My Computer, Control Panel, and System.
8
In the System Properties window, click the Hardware tab.
9
Click Device Manager.
10
In the Device Manager window, double-click Network Adapters.
11
Right-click the Cisco Systems wireless LAN adapter.
12
Click Properties.
13
In the Properties window, click the Advanced tab.
14
In the Advanced window, select Client Name and enter your computer's unique client name
in the Value dialog box.
15
Select SSID and enter your RF network's case-sensitive SSID in the Value dialog box. Click
OK.
6
16
If you are not connected to a DHCP server, follow these steps:
(a) Double-click My Computer, Control Panel, and Network and Dial-up Connections.
(b) Right-click Local Area Connection.
(c) Click Properties, Internet Protocol (TCP/IP), and Properties.
(d) Click Use the following IP address and enter the IP address, subnet mask, and default
gateway address of your computer, which can be obtained from your system
administrator. Click OK.
(e) In the Local Area Connection Properties window, click OK.
17
If you are prompted to restart your computer, click Yes.