Sony NEX-5K - alpha; Nex-5 With 18-55mm Lens Instrukcja serwisowa - Strona 33

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Aparat cyfrowy Sony NEX-5K - alpha; Nex-5 With 18-55mm Lens. Sony NEX-5K - alpha; Nex-5 With 18-55mm Lens 34 stron. Interchangeable lens digital camera
Również dla Sony NEX-5K - alpha; Nex-5 With 18-55mm Lens: Instrukcje 3D (9 strony), Podręcznik funkcji (7 strony), Instrukcja serwisowa (49 strony)

Drukuj stronę
Sony NEX-5K - alpha; Nex-5 With 18-55mm Lens Instrukcja serwisowa

3-2. CLEANING PROCEDURE OF OLPF

<Preparation for Remedy>
If you use the new Jig (J-6082-663-A) below, make sure to clean the CCD Cleaning Jig (Tip) below before using, please.
Note: Protection sheet is for preventing the scratch of a surface on the Jig (Tip).
The protection sheet may be come off the Jig when you take the Jig from a bag, but it is no problem.
<Cleaning Procedure for Tip of CCD Cleaning Jig>
1. Put the two cleaning cloths on a tray like below.
1 Souse the one cleaning cloth in ethyl alcohl.
2 Put the other cleaning cloth on a tray as it is dry.
2. Dab the tip of CCD cleaning jig at the cleaning cloth of 1 5 or 6 times.
* Do not slide the tip from right to left or up and down while dabbing.
3. Dab the tip of CCD cleaning jig at the cleaning cloth of 2 5 or 6 times.
* Do not slide from right to left or up and down while dabbing.
4. Wait until the tip will be dried completely.
NEX-3A/3D/3K/5A/5D/5K/5CK/5H_L2
A6CCCE74558B3E905AD2CEF677F08944E4F80AE9D638E1A7EC0B95815DA1F3ED
Protection Sheet
CCD Cleaning Jig (Tip)
CCD Cleaning Jig
CCD Cleaning Jig (New)
(J-6082-663-A)
1 Souse the cleaning
cloth in ethyl alcohol.
2 The dry cleaning cloth.
<Cleaning Procedure for the OLPF>
1. Clean up the tip of CCD cleaning jig.
2. Dab the tip of CCD cleaning jig at the OLPF, and pull up straight.
* Do not slide from right to left or up and down while dabbing.
3. Repeat "3" several times to clean up.
4. According to service manual, check if there is dirt on the CCD.
<ATTENTION>
If you cannot remove dirt with remedy above, cleaning by the following jig are used.
Soak a small amount of EE3310 (Liquid cleaner) after wrapping the cleaning cloth (J-6082-636-A) around the cleaning jig (J-6082-635-A).
Cleaning Cloth
(J-6082-636-A)
3-5E
OLPF
Cut
EE3310
Cleaning Jig
(J-6082-635-A)