Cisco Aironet 340 Series Skrócona instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt sieciowy Cisco Aironet 340 Series. Cisco Aironet 340 Series 13 stron. Usb client adapter
Również dla Cisco Aironet 340 Series: Skrócona instrukcja obsługi (12 strony), Informacje o wersji (14 strony), Skrócona instrukcja obsługi (16 strony), Skrócona instrukcja obsługi (12 strony), Skrócona instrukcja obsługi (12 strony)

Enter the domain name at the Domain Name field in the format ispname.net.

Select Tone Dialing or Pulse Dialing. This defines how the modem will dial telephone

numbers on your telephone system.

Note

The modem is not equipped with a speaker so you will not hear the base station dialing.

Set the Dial On Demand status by clicking On or Off. We recommend that you set the

parameter to on. When set to On, the Dial On Demand feature allows the built-in modem

to automatically connect to the ISP when an Internet browser attempts to access an Internet

IP address from a wireless PC.

Note

If auto-dial can be initiated by your browser or email, it might be necessary to

reconfigure the wireless PC Internet browser to use a LAN connection rather than a dial-up

connection to prevent the browser from attempting to dial the ISP.

Select the country where the modem operates by using the up and down buttons on the

Country selection box. For North American sites, the USA default option is correct.

Note

If your operating country is not shown, contact Technical Support for assistance.

Click Next. The settings you chose are displayed on the Set Up Base Station with My

Settings dialog box.

Click OK to accept the settings. Click Edit Base Station Settings if you want to change the

settings. After the base station IP address appears in the status line at the bottom of the

BSCU screen, the base station configuration is complete, and you can close the utility.

When you have changed the radio wireless network parameters, all PCs must match this

set up. To make other wireless PCs match, go to the Edit Client Properties selection in the

Client pull-down menu to make adjustments.

After the connection is established, the Base Station Connection Status screen appears in

the background. Click Ok when you finish reviewing the status of the connection.