Argo Wallner S580 Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Niszczarka do papieru Argo Wallner S580. Argo Wallner S580 13 stron.

MOTOr PrOTEcTiON

The shredder is equipped with a motor overload device.

after 2 minutes of continuous use allow the unit to cool for 60 minutes before reuse.

if:

the shredder is operated continuously for too long

excess paper is fed in or the paper is not fed squarely into the shredder the overlo-

ad device may shut off the motor.

if any of this happens:

•

unplug the shredder and leave 15 minutes to cool

•

plug the shredder in, put the switch in (rev), pull the excess paper from the cutters

and ensure the feed slot is clear

•

normal shredding may now be resumed.

Basic EXPLOiTaTiON rULEs

it is not advised to cut as many shreets as indicated as the maximum capacity of the

shredder. By exploiting the machine at it's top capacity we significantly reduce it's vitality.

Therefore, to maintain a durable and faultless work of the shredder, it is adviced to place

no more then 70% of the maximum amount of sheets to be shred at one time indicated

for each model by the producer. The maximum amount of sheet should be used only oc-

casionally.

it is forbidden to shred more sheets then the maximum amount of sheets to be shred at

one time indicated by the producer. it may cause the blockade of the machine and massive

engine overloading, which will diminish shredder's durability or even damage it . also you

should not shred soft objects such as foil, paper towels, toilet paper or fabrics. Nor paper

with self-adhesive tape should be placed into the shredder. Those materials wrap around

and jam the knifes.

iMPOrTaNT rEcOMMENDaTiONs / WarNiNGs

For your own safety please maintain particular care while installing and using the machine.

GENEraL

keep hands, long hair, loose articles of clothing, jewellery and ties away from shredder's

opening to avoid serious injury. Unstable surfaces may cause the fall of the shredder, which

can result in body injuries. Please avoid fast stopping, use of additional force or surface

unevenness while transporting the shredder on trolley, casters or table. do not remove

mechanical and electrical securities such as locks, covers or others. it is forbidden to use

objects not dediated to do so or liquids.

ELEcTricaL

The machine should be plugged to the electric circuit only as presented in the manual. The

socket must be in close vicinity with easy access to the shredder. While moving the machi-

ne, pull the plug from the socket. do not use the machine when the wire or plug are dama-

ged or after noticing symptoms of machine's damage. Please contact seller to obtain help.