Sony SSC-C104 Instrukcja serwisowa - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Aparat cyfrowy Sony SSC-C104. Sony SSC-C104 45 stron. Ccd color video camera
Również dla Sony SSC-C104: Instrukcja obsługi (4 strony)

Drukuj stronę

This section is extracted from

instruction manual.

NOTICE FOR THE SSC-C104

The graphical symbols are on the unit SSC-C104.

This symbol is intended to alert the user to the

presence of important operating and maintenance

(servicing) instructions in the literature accompanying

the appliance.

For the customers in the USA (SSC-C104 only)

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation.

This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions,

may cause harmful interfer-

ence to radio communications.

However, there is no guarantee that

interference will not occur in a particular installation.

If this equipment

dees cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

— Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

~ Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

~ Consult the dealer or an experienced radio/TV technician for help.

You are cautioned that any changes or modifications not expressly

approved in this manual could void your authority to operate this

equipment.

For the customers in the United Kingdom

(SSC-C108P only)

WARNING

THIS APPARATUS MUST BE EARTHED

IMPORTANT

The wires in this mains lead are coloured in accordance with the

following code:

Green-and-yellow:

Earth

Blue:

Neutral

Brown:

Live

As the colours of the wires in the mains lead of this apparatus may not

correspond with the coloured markings identifying the terminals in your

plug proceed as follows:

The wire which is coloured green-and-yellow must be connected to the

terminal in the plug which is marked by the letter E or by the safety

earth symbol @ or coloured green or green-and-yellow.

The wire which is coloured blue must be connected to the terminal

which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the terminal

which is marked with the letter L or coloured red.

SECTION

GENERAL

SSC-C104/C108P

This manual applies to both the SSC-C104 and SSC-C108P. The

operating instructions apply to both cameras, but their signal systems

and power requirements are different.

foi

24V AC, 60 Hz

220-240V AC, 50 Hz

SSC-C104

NTSC color system

SSC-C108P]|

PAL color system

Features

¢ High sensitivity

* Backlight compensation

* Turbo AGC

¢ CCD-IRIS function

* Compact and lightweight

¢ Line lock function

¢ C/CS mount capability

* DC/VS servo Auto-iris lens capability

¢ Automatic Tracing White Balance

Notes on Use

Power supply

* The SSC-C104 must always'be operated with a 24V AC, 60 Hz Class

2 power supply.

In the U.S.A, use a power supply which is UL Listed. In Canada, use a

power supply which is CSA Certified.

—When connecting the transformer, be sure to connect each lead to

the appropriate terminal. Wrong connection may cause malfunction

and/or damage to the video camera.

~ Ground the unit or an irregular voltage may be generated in the AC

power cord and may cause malfunction and/or damage to the video

camera.

* The SSC-C108P must always be operated with a 220-240V AC, 50 Hz.

Handling of the unit

Be careful not to spill water or other liquids on the unit, or allow

combustible or metallic materials inside the body. If used with foreign

matter inside, the camera may fail, or be a cause of fire or electric

shock.

Operating and storage locations

Avoid shooting very bright objects (such as light fittings) for an extended

period. Avoid operating or storing the unit in the following locations:

¢ Extremely hot or cold places (operating temperature —10°C to 50°C

(14°F to 122°F), storage temperature -40°C to 60°C (—40°F to 140°F)

* Damp or dusty places

* Where it is exposed to rain

* Locations subject to strong vibration

* Close to generators of powerful electromagnetic radiation such as

radio or TV transmitters.

Care of the unit

* Use a blower to remove dust or dirt on the surface of the lens or

optical filter.

* Clean the body with a dry soft cloth. If it is very dirty, use a cloth

dampened with a small quantity of neutral detergent, then wipe dry.

Avoid the use of volatile solvents such as thinners, alcohol, benzene,.

and insecticides. They may damage the surface finish, or impair the

operation of the camera.

In the event of any problems with the operation of the camera, contact

your authorized Sony dealer.