Sony TS-DSC-P41-01 Podręcznik - Strona 10

Przeglądaj online lub pobierz pdf Podręcznik dla Aparat cyfrowy Sony TS-DSC-P41-01. Sony TS-DSC-P41-01 12 stron. Sony camera tracksnap manual

Model TS-DSC-P41-01

TrackSnap Manual

The PIR lens is mounted in the Pelican 1060 case with your board. The lens is centred over the PIR Sensor

and is 16.5 mm from the top. We mount the lens with the "ridges" facing towards the PIR sensor. Do not

scratch the lens on either side. Also, do not mount any glass, tape of plastic film over top of the PIR

lens. These will not let infrared heat to pass through to trigger your PIR sensor. The PIR lens is glued to the

inside of the case (lens ridges pointed in, smooth side out), with a waterproof adhesive.

The PixController PIR detection electronics is unique in that is recovers very fast after each PIR detection

trigger and will be able to detect the next detection trigger almost immediately. This makes Walk-Test mode

on this system a very usable feature. The key is that the PixController PIR circuit used advanced digital

detection electronics. The PIR detection electronics recovery time is only ½ second!

The PIR sensor will allow the TrackSnap Camera to be used horizontally or vertically without needing the

PIR sensor to be rotated. The PIR sensor circuit is the most rugged and reliable on the market today.

Triggering occurs when a change in infrared levels is detected, as when a warm object moves in or out of

view of one of the sensor's "eyes." The PIR sensor design is quite resistant to false triggering. Also, the

camera can be mounted in elevated positions such as from high in a tree.

The Black case used in the TrackSnap Camera is a standard Pelican 1060 Micro Case modified for remote

camera applications. It is part of the Pelican Micro Case Series. Whilst the Micro Case will protect your

camera and electronics, as they are water-resistant, crushproof and have an automatic pressure purge

valve, THE CASE WILL NOT PROTECT THE CAMERA FROM SEVERE IMPACT. The camera itself is not

shockproof and the referred impact will be likely to damage the camera. Caution should be taken to avoid

impacts such as this.

They case includes a lanyard for easy attachment and has two external U bolts for mounting onto trees and

posts.

-10° F (-23° C)

+200° F (+93° C) -

8-7/16" x 4-7/16" x 2-1/4"

9-3/8" x 5-9/16" x 2-5/8"

(21.43 cm x 11.27 cm x 5.71 cm)

(23.81 cm x 14.13 cm x 6.67 cm)

Version

Page 10 of 12

Released

TS P41.2

This document comprises information provided by Suppliers and is

assumed to be correct.