Sony XCL-CG510C Podręcznik techniczny - Strona 36
Przeglądaj online lub pobierz pdf Podręcznik techniczny dla Aparat cyfrowy Sony XCL-CG510C. Sony XCL-CG510C 48 stron. Digital video camera module
Drukuj stronęInitializing
Perform "USERSET-LOAD 0" if you want to format
only the camera settings.
Perform the commands below only when you want to
restore all settings (ex. Boa rate not stored in user set and
the camera link tap) to the factory settings.
Notes
• Defect data, shading data will be eliminated as well.
• Do not turn off the power for 1 minute, as the unit is
initializing after operation.
Command
FACTORY-DEFAULT
Camera Information
The model name of a camera or its firmware information
can be read out.
Command
VENDOR
Manufacture name (SONY)
MODEL
VERSION
ID
MANUFACTURER
Help Command
To display the command list, execute HELP. To display
the details of a command, add HELP in front of the
command and execute.
Setting example:
Check about GAIN.
>HELP GAIN
GAIN:
Controls the analog gain (in dB).
This can take the value in following range:
min:0, max:18, step:1
OK
Read out items
Model name
Firmware version
Serial number
Data for service
Echo off
Echo back of the command is not available.
Set to echo off when you want to speed up the
communication response.
Command
ECHO
Restart
The camera is rebooted.
Command
RESET
Error information
acquisition
When an Access Denied error occurs, you can check the
details of the error from the excluded controls.
Command
GET-LAST-ERROR
36
Parameter
Function
0
Excluding echo back
1
Including echo back
Message
Auto Exposure feature is enabled.
Wide Dynamic Range feature is
enabled.
Shading detection is in process.
etc.