Sony XCU-CG160 Podręcznik techniczny - Strona 36

Przeglądaj online lub pobierz pdf Podręcznik techniczny dla Aparat cyfrowy Sony XCU-CG160. Sony XCU-CG160 45 stron. Digital video camera module

Drukuj stronę
Sony XCU-CG160 Podręcznik techniczny
Category (
) / Sub category (
Feature
AcquisitionControl
AcquisitionMode
AcquisitionAbort
AcquisitionFrameCount
AcquisitionFrameRateAuto
AcquisitionFrameRate
AcquisitionFrameRateActual
TriggerMode
TriggerSoftware
TriggerSource
TriggerActivation
TriggerDelay
TriggerInhibit
TriggerFastMode
TriggerCounter
TriggerCounterReset
TriggerAcceptanceRangeEnable
TriggerAcceptanceRangeLowerLimit
FrameCounter
FrameCounterReset
ExposureMode
ExposureTime
ExposureAuto
ExposureAutoSpeed
ExposureAutoLowerLimit
ExposureAutoUpperLimit
Exposure2Time
Exposure2Ratio
BurstFrameCount
BurstTriggerMode
BurstTriggerPeriod
BurstForceStop
AnalogControl
GainSelector
Gain
GainAnalog
*3
GainDigitalRed
*1 RO: Read only, WO: Write only, RW: Read/Write
*2 Color cameras are RO.
*3 Target models: Color cameras
*4 Enabled when color camera is set to BGR8, YCbCr8, or YCbCr422_8.
*5 Target camera mode: NORMAL
)
Read/
Description
*1
Write
RO
Category for the acquisition and trigger control
features.
RW
Sets the acquisition mode of the device.
RW
Aborts the acquisition immediately.
RW
Number of frames to acquire in MultiFrame acquisition
mode.
RW
Automatically controls the maximum rate (in Hz) at which
the line in a frame is captured when TriggerMode is Off.
RW
Controls the rate (in Hz) at which the line in a frame is
captured when TriggerMode is Off for the frame trigger.
RO
Indicates the actual frame rate (in Hz).
RW
Controls if the selected trigger is active.
RW
Generates an internal trigger.
RW
Specifies the internal signal or physical input line to use as
the trigger source.
RW
Specifies the activation mode of the trigger.
RW
Specifies the delay in microseconds to apply after the trigger
reception before activating it.
RW
Specifies the activation of the trigger.
RW
Sets the trigger mode of the image sensor.
RO
Gets the count of trigger.
WO
Resets the trigger counter.
RW
Controls if the trigger acceptance range is enabled.
RW
Sets the lower limit of trigger acceptance range.
RO
Gets the count of frames.
WO
Resets the frame counter.
RW
Sets the operation mode of the exposure.
RW
Sets the exposure time when ExposureMode is Timed and
ExposureAuto is Off.
RW
Sets the automatic exposure mode when ExposureMode is
Timed.
RW
Sets the automatic exposure speed.
RW
Sets the lower limit for Exposure Auto mode.
RW
Sets the upper limit for Exposure Auto mode.
RW
Sets the second exposure time for burst trigger mode.
RW
Sets the exposure time ratio for burst trigger mode.
RW
Sets the number of frames to acquire in burst trigger mode.
RW
Sets burst trigger mode.
RW
Sets the burst period type.
WO
Stops the acquisition of the device at the end of the current
frame.
RO
Category that contains the analog control features. –
RW
Selects which gain is controlled by the various gain features. –
RW
Controls the selected gain as an absolute physical value (in
dB).
RW
Controls the selected gain as an absolute physical value.
RW
Digital gain for the red channel.
36
See
page
–
–
–
–
21
21
21
17
17
17
8
20
19
22
20
20
20
20
22
22
17
16
16
16
16
16
18
18
18
18
18
18
15
15
24