Sony 3-293-639-11(1) Instrukcja obsługi - Strona 30
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sony 3-293-639-11(1). Sony 3-293-639-11(1) 36 stron. Sony micro hi-fi component system operating instructions
Messages
CD/MP3 player, Tuner
CD Over: You have reached the end of
the disc while pressing
playback or pause.
Complete!: The preset operation ended
normally.
LOCKED: The disc tray does not open.
Contact your nearest Sony dealer.
No Disc: There is no disc in the system,
or you have loaded a disc that cannot
be played.
No Step: All of the programmed tracks
or files have been erased.
Push SELECT!: You tried to set the clock
or timer during timer operation.
Push STOP!: You pressed PLAY MODE
during playback.
Reading: The system is reading
information of the disc. Some buttons
are not available.
SET CLOCK!: You tried to select the timer
when the clock is not set.
SET TIMER!: You tried to select the timer
when the Play Timer is not set.
Step Full!: You tried to program more
than 26 tracks or files (steps).
TIME NG!: The Play Timer start and end
times are set to the same time.
USB device
Complete!: The audio file or folder on
the USB device has been erased.
Device Full!: The USB device is full.
Erase Error!: Erase of audio files or
folders on the USB device failed.
Error: The USB device could not be
recognized or an unknown device is
connected (page 28).
Fatal Error!: The USB device has been
disconnected while recording to or
erasing audio files or folders on the
USB device.
0
GB
FLDR Full: The number of folders on the
USB device has reached the maximum.
No Device: No USB device is connected
or the connected USB device has been
stopped.
No Step: All of the programmed tracks
during
or files have been erased.
No Track: No playable file is loaded in
the system.
Not in Use: You have made an invalid
operation.
Not Supported: An unsupported USB
device is connected.
Please Wait: The system is readying for
usage of an USB device.
Protected!: You tried to record or erase
a write-protected USB device.
Reading: The system is recognizing the
USB device.
REC Error!: Recording did not start,
stopped partway, or otherwise could
not be performed (page 26).
Removed: The USB device has been
removed.
Step Full!: You tried to program more
than 26 tracks or files (steps).
Storage Drive: An USB device is
connected.
Track Full: The number of files on the
USB device has reached the maximum.