Cisco Aironet 350 Series Informacje o wersji - Strona 5

Przeglądaj online lub pobierz pdf Informacje o wersji dla Sprzęt sieciowy Cisco Aironet 350 Series. Cisco Aironet 350 Series 14 stron. Managed switches
Również dla Cisco Aironet 350 Series: Skrócona instrukcja obsługi (12 strony), Skrócona instrukcja obsługi (16 strony), Skrócona instrukcja obsługi (12 strony), Skrócona instrukcja obsługi (12 strony), Skrócona instrukcja obsługi (2 strony), Podręcznik (10 strony), Poznaj (16 strony), Skrócona instrukcja obsługi (5 strony)

Drukuj stronę

Cisco Aironet 350 Series Informacje o wersji

802.1x protocol.

comply.

Table 1

Firmware Version

PC/PCI cards 4.13

PC/PCI cards 4.16

PC/PCI cards 4.23

PC/PCI cards 4.25 and later

WGB34x/352 8.58

WGB34x/352 8.61 or later

AP34x/35x 11.05 and earlier

AP34x/35x 11.06 and later

AP34x/35x 11.07 and later

AP34x/35x and BR35x 11.21

through 12.01T

Draft standard 8 is the default setting in firmware version 11.05 and earlier, and it might remain in effect

Note

when you upgrade the firmware to version 11.06 or later. Check the setting on the Authenticator

Configuration page in the management system to make sure the best draft standard for your network is

selected.

Use the Authenticator Configuration page in firmware version 11.06 or later to select the draft of the

802.1x protocol the access point or bridge radio should use. Follow these steps to set the draft for your

access point or bridge:

Browse to the Authenticator Configuration page in the access point management system:

Step 1

On the Summary Status page, click Setup.

On the Setup page, click Security.

On the Security Setup page, click Authentication Server.

Use the 802.1x Protocol Version (for EAP authentication) pull-down menu to select the draft of the

Step 2

802.1x protocol the access point or bridge radio should use. Menu options include:

•

Release Notes for Cisco Aironet 340 and 350 Series Access Points and 350 Series Bridges Running Firmware Version 12.01T1

OL-3740-01

Table 1

lists firmware versions for Cisco Aironet products and the draft with which they

802.1x Protocol Drafts and Compliant Client Firmware

Draft 7—No radio firmware versions compliant with Draft 7 have LEAP capability, so you

should not need to select this setting.

Draft 8—Select this option if LEAP-enabled client devices that associate with this access point

or bridge use radio firmware versions 4.13, 4.16, or 4.23.

Draft 7

Draft 8

—

Limitations and Restrictions

802.1x-2001

—