Sony CHC-CL3 Instrukcja obsługi - Strona 26

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sony CHC-CL3. Sony CHC-CL3 32 stron. Compact hi-fi component system
Również dla Sony CHC-CL3: (Angielski) Podręcznik szkoleniowy (32 strony)

Drukuj stronę

Precautions (continued)

To save a tape permanently

To prevent a tape from being accidentally recorded

over, break off the cassette tab from side A or B as

illustrated.

Tab of side B

If you later want to reuse the tape for recording, cover

the broken tab with adhesive tape.

Cleaning the tape heads

Clean the tape heads after every 10 hours of use.

Be sure to clean the tape heads before you start an

important recording or after playing an old tape.

Use a separately sold dry-type or wet-type cleaning

cassette. For details, refer to the instructions of the

cleaning cassette.

Demagnetizing the tape heads

Demagnetize the tape heads and the metal parts that

have contact with the tape after every 20 to 30 hours

of use with a separately sold demagnetizing cassette.

For details, refer to the instructions of the

demagnetizing cassette.

Side A

Tab of side A

Break off the

cassette tab of

side A

Troubleshooting

If you have any problem using this system, use

the following checklist.

First, check that the power cord is connected

firmly and that the speakers are connected

correctly and firmly.

Should any problem persist, consult your

nearest Sony dealer.

General

There is no sound.

• Turn VOLUME clockwise (or press VOL+ on

the remote).

• Make sure the headphones are not connected.

• Check the speaker connections (see page 6).

Sound comes from one channel, or unbalanced

left and right volume.

• Connect the speaker cords properly (see page 6).

• Place the speakers as symmetrically as possible.

• Connect only one of the supplied speakers to

each set of speaker terminals.

• Connect the supplied speakers.

There is severe hum or noise.

• Move the system away from the source of noise.

• Connect the system to a different wall outlet.

• Install a noise filter (commercially available) to

the power line.

"0:00" (for the European model) or "12:00 AM"

(for other models) flashes in the display.

• Set the clock again (see page 8).

The timer cannot be set.

• Set the clock again (see page 8).