Sony CMT-CP100 Instrukcja obsługi - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sony CMT-CP100. Sony CMT-CP100 26 stron. Micro hifi component system
Również dla Sony CMT-CP100: Instrukcja obsługi (24 strony), Instrukcja serwisowa (50 strony), Instrukcja serwisowa (2 strony)
Drukuj stronę
To change
the preset
number
Start over from step 2.
Tip
The
preset stations are
saved in the system's memory
for about a day even if you disconnect the power cord
or a power failure occurs.
To change
the AM tuning
interval
(not applicable
on the European
and
Middle
Eastern
models)
The AM tuning interval is factory-preset to 9 kHz (or
10 kHz for some areas). To switch the AM tuning
interval, tune in any AM station first, then turn off the
system. Pressing and holding down TUNING +, turn
the system back on. When you change the interval,
all the AM preset stations are erased. To change back
to the original interval, tune in any AM station first,
then turn off the system. Pressing and holding down
TUNING -, turn the system back on.
The system can store a total of
30 preset
stations (20 for FM and 10 for AM).
1
Turn FUNCTION until
-TUNER"
appears
in the display.
The indicator surrounding
the TUNER
BAND button lights up.
2 Press TUNER BAND to select FM or
AM.
3 Press TUNING MODE repeatedly until
"AUTO" appears in the display.
4 Press TUNING +/- (or 44IDp
on the
remote).
The frequency changes as the system scans
for a station. Scanning stops automatically
when a station is tuned in. At that time,
"TUNED" and "STEREO" (for stereo
program only) appear.
5 Press MEMORY on the remote.
A preset number flashes.
P&t
number
Frequency
6
Press HI/H
on the remote
repeatedly to select the preset number
that you want.
7 Press ENTER on the remote.
The station is stored to the selected preset
number.
8
Repeat steps 2 through 7 to preset
other stations.
To tune in a weak
station
In step 3, press TUNING MODE repeatedly
until "AUTO" and "PRESET" disappear from
the
display, then
press TUNING +/- (or
44/m
on the remote) repeatedly to tune in
the station.
-
Preset Tuning
Presetting radio stations in the system's
memory in advance make it easy to tune in
those
stations later (see "Presetting radio
stations" on this page).
1
Turn FUNCTION until "TUNER" appears
in the display.
2 Press TUNER BAND to select FM or
AM.
3 Press TUNING MODE repeatedly until
"PRESET" appears in the display.
4 Press TUNING +I- (or 44lH
on the
remote) repeatedly to display the preset
number of the desired station.
To turn off the radio
Press l/O.
10