Sony CMT-ED1A Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sony CMT-ED1A. Sony CMT-ED1A 36 stron. Compact component stereo system
Również dla Sony CMT-ED1A: Instrukcja obsługi (36 strony)

Drukuj stronę

3 Attach the speakers.

Facing the front of the unit, attach the

speaker connected to the SPEAKER R

jack onto the right side of the unit and

the speaker connected to the

SPEAKER L jack onto the left side of

the unit.

Set VOLTAGE SELECTOR to the

position of your local power line

voltage (except for North American

model.)

220-240V

VOLTAGE SELECTOR

110-120V

Reinstall the rear cover.

Put the wires through the hole at the

bottom of the rear cover.

Turn the unit upside down holding

the glass door with firm hand and

set the speaker cord into a groove of

the unit.

Connect the power cord to a wall

outlet.

Note on the glass door of CD player

The CD player cover of the CMT-ED1 is made of

tempered glass.

Under normal conditions, this tempered glass is

more shock resistant and able to bear more

weight than ordinary glass. This glass, however,

may shatter if it receives a sharp blow or if it is

scratched.

To detach the speakers

1 Slide the speakers in the opposite

direction of the arrows of the

illustration in "Attach the speakers"

(see step 2 -3 on this page.)

2 After detaching the speakers, set the

speaker cords into the speaker cord

groove at the bottom of the speaker.

Otherwise, the speaker cord could be

damaged.

Groove