Argo Lotus Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wentylator Argo Lotus. Argo Lotus 9 stron. Wall fan
Drukuj stronę Do not use abrasive detergents for cleaning this appliance. Clean
the appliance with the aid of a damp (not wet) cloth rinsed in hot
soapy water. Always remove the plug from the mains socket before
cleaning.
To disconnect the fan, push the switch to OFF and remove the plug
from the socket. Pull on the plug only. Avoid pulling on the cord
when disconnecting the fan.
Do not place any objects on the cord and do not bend it.
It is not advisable to use extension cords, as these may overheat
and cause the risk of fire. Do not use a single extension cord to
operate multiple appliances.
Do not immerse the cord, plug or any other element of the appliance
in water or other liquids.
Do not touch the plug with wet hands.
Do not place the fan above or near another heat source.
Do not connect the appliance to the mains power before it has been
properly assembled and positioned.
Do not run the cord under carpets. Do not cover the cord with
blankets, carpets or similar materials. Place the cord far away from
busy areas or where it cannot be accidentally pulled-out.
Do not position the fan below a socket outlet.
Do not operate the appliance outdoors.
WARNING: DO NOT DEPEND ON THE ON/OFF BUTTON
SWITCH AS THE SOLE MEANS OF
DISCONNECTING POWER. WHEN SERVICING OR MOVING
THE FAN, ALWAYS UNPLUG THE
POWER CORD.
Do not place the fan on soft surfaces, like a bed, where openings
may become blocked. Always place the fan on a stable, flat, level
surface when operating, to avoid the chance of the overturning.
Locate the power cord so the fan or other objects are not resting on
it.
Always unplug the fan when not in use.
In order to avoid accidents turn unit off if unattended.
In the event of any problems (abnormal noise or a strange smell)
switch off the appliance immediately, do not attempt to repair it and
take it to your local after sales service.
V 12/16
12