Argo TABLO EVO Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wentylator Argo TABLO EVO. Argo TABLO EVO 10 stron.

Connect the power cable to an appropriate power socket (220-240V ~).

Place the fan upright on a flat, stable surface.

Do not use this fan in an area with high humidity, rich in dust or water.

Press ON / OFF on the control panel or remote control. The emission of a sound will indicate that the device is on, the

ventilation speed will be high for 1 second, and then switch to low ventilation speed, which will remain so until a different

ventilation speed is selected.

This ventilator can be used in 3 ventilation modes: NORMAL, NATURAL and SLEEP.

In each of the 3 modes by pressing the SPEED button you can change the fan speed between low, medium and high.

ON/OFF BUTTON

Press ON/OFF on control and on remote control to switch of or switch off the appliance.

After turning on the unit, it will start to operate at high fan speed for 1 second (H icon will light up), then switch to low fan

speed (L icon will light up).

It will then be possible to select the desired fan speed by pressing the Speed button.

SPEED BUTTON

Repeatedly press the Speed button on the control panel or remote control to adjust the fan speed in the following

sequence: low - medium - high

On the control panel the corresponding LEDs will light up according to your selection and will be visible as follows:

L=low speed

M=medium speed

SWING BUTTON

To activate or deactivate the swing function, press the button

control.

V 01/21

HOW TO USE THE APPLIANCE

H=high speed

Speed button

Timer button

Swing button

ON/OFF button

on the control panel or the SWING button on the remote