DIGITEN DHTC-1011 Skrócona instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Kontroler DIGITEN DHTC-1011. DIGITEN DHTC-1011 8 stron. Temperature and humidity controller
Drukuj stronę1. Long press the SET button until the
2. Short press the UP or DOWN button and there will be a
then press the SET button to select the temperature.
3. Press UP or DOWN to adjust the RUN temperature you required.
4. Short press SET button to set STOP temperature and next value.
5. Long press SET button to save and exit.
Set humidification mode:
To set the RV(RUN value) < SV(STOP value), the system will be in
humidification mode and the
display. When PV(Measuring temperature) < RV, the green indicator of
HUMIDITY will light and the humidification equipment will work.
When PV ≥ SV, the green light will go out and the humidification
equipment will stop working.
1. Long press the SET button until the
2. Short press the UP or DOWN button and there will be a
then press the SET button to select the Humidity.
3. Press UP or DOWN to adjust the RUN value you required.
4. Short press SET button to set STOP temperature and next value.
5. Long press SET button to save and exit.
Set dehumidification mode:
To set the RV(RUN value) > SV(STOP value), the system will be in
dehumidification mode and the
the display. When PV(Measuring temperature) > RV, the green indicator
of HUMIDITY will light and the dehumidification equipment will work.
When PV ≤ SV, the green light will go out and the dehumidification
equipment will stop working.
1. Long press the SET button until the
2. Short press the
press the SET button to select the humidity.
3. Press
or
4. Short press SET button to set STOP temperature and next value.
or
button and there will be a
to adjust the RUN value you required.
appears and the
will appear on the
appears and the
appears and the
flashes.
flashing,
flashes.
flashing,
will appear on
flashes.
flashing, then