Sony LBT-ZX9 Instrukcja obsługi - Strona 22

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sony LBT-ZX9. Sony LBT-ZX9 40 stron. Muteki mini hi-fi component system
Również dla Sony LBT-ZX9: Arkusz specyfikacji (2 strony)

Drukuj stronę
Sony LBT-ZX9 Instrukcja obsługi

Timer

Falling asleep to music

— Sleep Timer

You can set the system to turn off after a certain
time, so that you can fall asleep to music.
Press SLEEP repeatedly.
Each time you press the button, the minute
display (the turn-off time) changes cyclically as
follows:
AUTO* t 90 t 80 t 70 t ... t 10 t
OFF
* The system automatically turns off in 100 minutes or
after the current disc or tape finishes playing.
Other operations
To
Check the
remaining time**
Change the time
to turn off
Cancel the Sleep
Timer
** You cannot check the remaining time if you select
"AUTO".
Notes
• Do not set to "AUTO" during CD Synchro
Recording on a tape.
• The "SLEEP" lights up in the display when the Sleep
Timer is activated.
Tip
You can use the Sleep Timer, even if you have not set
the clock.
22
US
Do this
Press SLEEP once.
Press SLEEP repeatedly to select
the time you want.
Press SLEEP repeatedly until
"SLEEP OFF" appears in the
display.

Waking up to music

— Play Timer

You can wake up to music at a preset time
everyday. Make sure you have set the clock (see
"Setting the clock" on page 9).
1
Prepare the music source you want to
play.
• Disc: Load a disc. To start from a specific
track, make a program (see "Creating
your own program" on page 12).
• Tape: Load a tape with the side you want
to play facing forward.
• Radio: Tune in the preset station you
want (see "Listening to the radio" on
page 14).
2
Turn VOLUME +/– (or press VOLUME +
or – on the remote) to adjust the
volume.
3
Press CLOCK/TIMER SET.
"PLAY SET?" flashes in the display.
4
Press ENTER.
"ON" appears and the hour indication
flashes in the display.
5
Set the time to start playback.
Press M or m (or >+ or –. on the
remote) repeatedly to set the hour, then
press ENTER.
The minute indication flashes in the
display.
Press M or m (or >+ or –. on the
remote) repeatedly to set the minute, then
press ENTER.
6
Set the time to stop playback following
the same procedure as step 5.
7
Press M or m (or >+ or –. on the
remote) repeatedly until the music
source you want appears in the
display.
The display changes as follows:
t TUNER y CD PLAY T
t TAPE PLAY T