Reimage the Firepower 2100 to ASA or Firepower Threat Defense
firepower-2110 /firmware/auto-install # install security-pack version 6.3.0-1
The system is currently installed with security software package 9.10.0.1, which has:
- The platform version: 2.5.1.52
- The CSP (asa) version: 9.10.1.1
If you proceed with the upgrade 6.3.0-1, it will do the following:
- upgrade to the new platform version 2.5.1.78
- reimage the system from CSP asa version 9.10.1.1 to the CSP ftd version 6.3.0.1
Do you want to proceed ? (yes/no): yes
This operation upgrades firmware and software on Security Platform Components
Here is the checklist of things that are recommended before starting Auto-Install
(1) Review current critical/major faults
(2) Initiate a configuration backup
Attention:
If you proceed the system will be re-imaged. All existing configuration will be lost,
and the default configuration applied.
Do you want to proceed? (yes/no): yes
Triggered the install of software package version 6.3.0-1
Install started. This will take several minutes.
For monitoring the upgrade progress, please enter 'show' or 'show detail' command.
firepower-2110 /firmware/auto-install #
Step 5
Wait for the chassis to finish rebooting.
FXOS comes up first, but you still need to wait for the ASA/FTD to come up.
After the application comes up and you connect to the application, for FTD you are prompted to accept the
EULA and perform initial setup at the CLI.
For ASA, you access user EXEC mode at the CLI.
Example:
FTD Example: Console
[...]
************ Attention *********
Initializing the configuration database.
system resources (CPU, memory, and disk), this may take 30 minutes
or more to complete.
************ Attention *********
Executing S09database-init
Executing S11database-populate
Cisco FPR Series Security Appliance
firepower login: admin
Password:
Successful login attempts for user 'admin' : 1
Copyright 2004-2019, Cisco and/or its affiliates. All rights reserved.
[...]
User enable_1 logged in to firepower
Logins over the last 1 days: 1.
Failed logins since the last login: 0.
Type help or '?' for a list of available commands.
Cisco ASA and Firepower Threat Defense Reimage Guide
34
Cisco ASA and Firepower Threat Defense Reimage Guide
Depending on available
[
OK
]
Drukuj stronę