Sony MEX-M100BT Instrukcja obsługi - Strona 32
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sony MEX-M100BT. Sony MEX-M100BT 45 stron. Bluetooth
Drukuj stronę
Connection/Installation
Cautions
• Run all ground (earth) leads to a common
ground (earth) point.
• Do not get the leads trapped under a screw, or
caught in moving parts (e.g., seat railing).
• Before making connections, turn the boat's
ignition off to avoid short circuits.
• Connect the yellow and red power supply leads
only after all other leads have been connected.
• Be sure to insulate any loose unconnected leads
with electrical tape for safety.
• Choose the installation location carefully so that
the unit will not interfere with normal boating or
car driving operations.
• Avoid installing the unit in areas subject to dust,
dirt, excessive vibration, or high temperature,
such as in direct sunlight or near heater ducts.
• Select carefully the mounting location to avoid
internal damage by water entering the unit. Areas
subject to water splashes should be avoided. The
Waterproof Car Stereo Cover (not supplied) is
recommended.
• Use only the supplied mounting hardware for a
safe and secure installation.
Note on the power supply lead (yellow}
When connecting this unit in combination with other
stereo components, the amperage rating of the boat
circuit to which the unit is connected must be higher
than the sum of each component's fuse amperage
rating.
Mounting angle adjustment
Adjust the mounting angle to less than 45°.
Parts List for Installation
CD
®
®
0
®
®
®
®
@
®
0
Sxmax.Smm
(7/32
x
max.
5/16
in)
Max. size M4
x
6
mm
(1/4
in)
• This parts list does not include all the package
contents.
• The bracket
CD
and the protection collar® are
attached to the unit before shipping. Before
mounting the unit, use the release keys ®to
remove the bracket
CD
from the unit. For details,
see "Installing the microphone" (page 35).
• Keep the release keys® for future use as they are
also necessary if you remove the unit from your
boat.