Sony MEX-N4150BT Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sony MEX-N4150BT. Sony MEX-N4150BT 36 stron. Bluetooth audio system

To install the microphone

For details, see "Installing the microphone (MEX-

N5150BT only)" (page 32).

Connecting with an iPhone/iPod

(BLUETOOTH Auto Pairing)

When an iPhone/iPod with iOS5 or later installed is

connected to the USB port, the unit is paired and

connected with the iPhone/iPod automatically.

To enable BLUETOOTH Auto Pairing, make sure

[AUTOPAIR] in [BT] is set to [ON] (page 20).

Activate the BLUETOOTH function on the

iPhone/iPod.

Connect an iPhone/iPod to the USB port.

Make sure that

lights up on the display of the

unit.

Notes

 BLUETOOTH Auto Pairing is not possible if the unit is

already connected to another BLUETOOTH device. In

this case, disconnect the other device, then connect

the iPhone/iPod again.

 If BLUETOOTH Auto Pairing is not established, see

"Preparing a BLUETOOTH Device" for details (page 7).

Connecting an iPod/USB Device

Turn down the volume on the unit.

Connect the iPod/USB device to the unit.

To connect an iPod/iPhone, use the USB

connection cable for iPod (not supplied).

Connecting Other Portable

Audio Device

Turn off the portable audio device.

Turn down the volume on the unit.

Connect the portable audio device to the

AUX input jack (stereo mini jack) on the

unit with a connecting cord (not

supplied)*.

* Be sure to use a straight type plug.

Press SRC to select [AUX].

To match the volume level of the connected

device to other sources

Start playback of the portable audio device at a

moderate volume, and set your usual listening

volume on the unit.

Press MENU, then select [SET SOUND]  [SET AUX

VOL] (page 19).