Sony MHC-DX80 Instrukcja obsługi - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sony MHC-DX80. Sony MHC-DX80 28 stron. Mini hi-fi component system

Tuner

You can preset 20 stations for FM and 10

stations for AM.

Press TUNER/BAND repeatedly to

select FM or AM.

Press and hold M or m (or TUNING

+/– on the remote) until the frequency

indication starts to change, then

release.

Scanning stops when the system tunes in a

station. "TUNED" and "STEREO" (for a

stereo program) appear.

Press TUNER MEMORY.

A preset number appears in the display.

Press . or > to select the preset

number you want to store.

Press ENTER.

"COMPLETE" appears in the display.

The station is stored.

Repeat steps 1 to 5 to store other

stations.

05TUN_MHC-DX80.p65 GB

To tune in a station with a weak

signal

Press M or m (TUNING +/– on the remote)

repeatedly to tune in the station manually.

To change the AM tuning interval

The AM tuning interval is factory set to 9 kHz

(10 kHz in some areas). To change the AM tuning

interval, select any AM station first, then turn off the

power. While holding down the ENTER button, turn

the power back on. When you change the interval,

AM preset stations will be erased. To reset the

interval, repeat the same procedure.

Tips

• The preset stations are retained for half a day even

if you unplug the power cord or if a power failure

occurs.

• Pressing TUNER/BAND while the power is off

automatically turns the power on and TUNER is

selected as a function. When the system is in the

power saving mode, this function does not work.

Preset number

17/07/2001, 2:49 PM

MHC-DX80 4-232-652-14 (1)