Sony MHC-EX5 Instrukcja obsługi - Strona 23
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sony MHC-EX5. Sony MHC-EX5 29 stron.
Drukuj stronęNotes
»* You cannot set the timer if the timer-on
and -off times are the same.
For greater enjoyment of your stereo
system, you can connect other components
to the stereo. You can connect:
«an MD recorder
*aDAT deck
« headphones
« an optional tape player
eaVCR
* a turntable
Connecting an MD
recorder or a DAT deck
You can record from the CD into the MD
recorder or DAT deck digitally.
rear panel of the CD player
an MD recorder
or DAT deck
(Sony POC-15, etc.)
Connect
With
To connect an MD recorder or a DAT
deck for analog recording
You can record from the sound sources of
the stereo into the MD recorder or DAT
deck in analog sound.
You can also listen to the sound from the
MD recorder or DAT deck by pressing
MD/DAT.
rear panel of the integrated stereo
amplifier
an MD recorder
or DAT deck
Connect
With
LINE IN jacks of the
MD/DAT OUT
MD recorder or
jacks
DAT deck
LINE OUT jacks of
© MD/DAT IN jacks
the MD recorder or
DAT deck
Use audio cords and make sure to connect
the plugs to jacks of the same colour.
Then press one of the FUNCTION buttons
(or either of the TAPE 1, TAPE 2,
AUX/VIDEO, MD, CD or TUNER on the
remote) to select the sound sources.
To connect other equipment with
AU BUS jack
You can connect other Sony equipment
with AU BUS.
rear panel of the tape player
Other Sony
equipment
+
You can use Automatic Source Selection,
Synchronized Recording and Timer
Recording with the connected
equipment.
However, these features may not be
provided on some models.
Connecting Audio Optional
Equipment
To connect headphones
You can connect the headphones (stereo-
jack) to the HEADPHONES jack.
front panel of the integrated stereo
amplifier
HEADPHONES
To connect an optional tape player
You can connect an optional tape player
and hear the sound through the connected
speakers.
rear panel of the integrated stereo
amplifier
a tape player
Connect
With
LINE IN jacks of the
TAPE2 OUT jacks
tape player
LINE OUT jacks of | TAPE2 IN jacks
the tape player
Use audio cords and make sure to connect
the plugs to jacks of the same colour.
Then press TAPE 2 (or press TAPE 2 on the
remote) until the TAPE 2 indicator lights.
Connecting a VCR.
You can connect a VCR and hear the sound
through the connected speakers.
You can also record the VCR sound.
rear panel of the integrated stereo
amplifier
continue to next page >
Chapter 6:
Additional Features
23
i i
a
ae
st
dima