Sony MHC-GX750 Instrukcja obsługi - Strona 35

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sony MHC-GX750. Sony MHC-GX750 47 stron. Limited warranty (us only)
Również dla Sony MHC-GX750: Instrukcja obsługi (48 strony), Specyfikacje (2 strony), Ograniczona gwarancja (1 strony)

Drukuj stronę

Tuner

Severe

hum or noise/stations

cannot

received.

("TUNED"

or "STEREO"

flashes

the display.)

• Set the prope:

band and fiequency

(page 15).

• Connect

the antenna

properly

(page 8).

• Find a place and an orientation

that provide

good

reception,

then set up the antenna

again. If you

cannot obtain good reception,

we recommend

you

connect

a commercially

available

exte:nal

antenna.

• The supplied

FM lead antenna

receives

signals

along its entire length, so make sure you exWnd it

fiflly.

• Locate fl:e antem:as

as t:ar away flon: fl:e speake:

cords as possible

• T!), turning off SU:Totmding electrical

equipment

A stereo FM program

cannot

be received

stereo.

• Pless FM NIODE _epeatedly

until "STEREO'

appears.

Tape deck

The tape does not record

or play, or there

is a

decrease

in sound

level.

• The heads

me di_y. Clean them (page 38)

• The recor@layback

heads are magnetized.

Demagnetize

them (page 38)

The tape does not erase

completely.

• The _ecord/playback

heads are magnetized.

Demagnetize

them (page 38)

There is excessive

wow or flutter,

or the sound

drops

out.

• The capstans

or pinch _ollas

me di_,

Clean flwm

(page 38)

Noise

increases

or the high frequencies

are

erased.

• The _ecord/playback

heads are magnetized.

Demagnetize

them (page 38)

The tape does not record.

• No cassette

is loaded.

Load a cassette.

• The tab has been removed

flora the cassette.

Cover fl:e broken

tab with adhesive

tape

(page 38).

• The tape has wound to the end.

Transmitter

(MHC-GX750

only)

There

is no sound.

• Check the connection

of the optional

component.

• Check tha_ the optional

component

is turned on.

• Tmn up the volmne on the connected

optional

component,

if the transmitter

is connected

to the

headphones

jack.

• Change the radio fiequency

using the CHANNEL

selector

on the transmitta,

then press WIRELESS

on the unit again.

• If you connect

tlle transmitte!

to the analog out

jacks of an audio reproducer,

make sure that the

NOISE

FILTER

switch

is set to OFF.

• Make sure that the NOISE

FILTER

switch is set

to either ON or OFF (If the switch gets stuck

between

ON and OFF, the sound will be cut oft)

There

is severe hum or noise.

• If the transmitter

is connected

to the headphones

jack, turn down the vohune

of the connected

optional

component

If the connected

optional

component

has the BASS BOOST

or MEGA

BASS fimction, set these fimction

to OFF

• If file connected

optional

component

has a LINE

OUT jacks, connect

its LINE OUT jacks.

• Change

the radio frequency

with the CHANNEL

selector

on the transmitter

then press WIRELESS

on the unit again.

• If you connect

file transmitta

to the analog out

j acks of an audio reproduca,

make sme that the

NOISE

FILTER

switch

is set to OFF.

If the

system

still

does

not

operate

properly

after

performing

the

above

measures,

reset

the

system

as follows:

Use buttons on the unit lbr the operation.

1 Disconnect

the power cord.

2 Reconnect

the power cord.

3 Press II, PLAY MODE/TUNING

MODE and

DISC 1 at the same time.

4 Press I/_

to turn on the system.

The system is reset to the factory settings. You

should set the settings you made, such as the

preset stations, clock, and timer.

-4

¢0