Sony MHC-NX1 Instrukcja obsługi - Strona 42
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sony MHC-NX1. Sony MHC-NX1 44 stron. Mini hi-fi component system
Drukuj stronę
Specifications
Amplifier section
For the U.S. model
AUDIO POWER SPECIFICATIONS:
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
with 6 ohm loads both channels driven, from
70-20,000 Hz; rates 100 watts per channel
minimum RMS power, with no more than
0.9% total harmonic distortion from 250
milliwatts to rated output.
North American model
Front Speaker:
Continuous RMS power output (reference)
Total harmonics distortion
European model
Front Speaker:
DIN power output (rated) 80 + 80 watts
Continuous RMS power output (reference)
Music power output (reference)
Other models
The following measured at AC 120/220/240 V,
50/60 Hz
Front Speaker:
DIN power output (rated) 90 + 90 watts
Continuous RMS power output (reference)
42
130 + 130 watts
(6 ohms at 1 kHz,
10% THD)
Less than 0.07%
(6 ohms at 1 kHz, 40 W)
(6 ohms at 1 kHz, DIN)
100 + 100 watts
(6 ohms at 1 kHz,
10% THD)
160 + 160 watts
(6 ohms at 1 kHz,
10% THD)
(6 ohms at 1 kHz, DIN)
110 + 110 watts
(6 ohms at 1 kHz,
10% THD)
Inputs
VIDEO IN:
(phono jacks)
MD IN:
(phono jacks)
MIC:
(mini jack)
Outputs
MD OUT:
(phono jacks)
PHONES:
(stereo mini jack)
FRONT SPEAKER:
REAR SPEAKER:
SUPER WOOFER:
CD player section
System
Laser
Laser output
Wavelength
Frequency response
Signal-to-noise ratio
Dynamic range
CD DIGITAL OUT
(Square optical connector jack, rear panel)
Wavelength
Output Level
Tape player section
Recording system
Frequency response
(DOLBY NR OFF)
Wow and flutter
voltage 250 mV,
impedance 47 kilohms
voltage 450 mV,
impedance 47 kilohms
sensitivity 1 mV,
impedance 10 kilohms
voltage 250 mV
impedance 1 kilohms
accepts headphones of 8
ohms or more
accepts impedance of 6 to
16 ohms
accepts impedance of 16
ohms
Voltage 1 V, impedance 1
kilohms
Compact disc and digital
audio system
Semiconductor laser
( =780nm)
Emission duration:
continuous
Max. 44.6 W*
*This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
780 – 790 nm
20 Hz – 20 kHz (±0.5 dB)
More than 90 dB
More than 90 dB
660 nm
–18 dBm
4-track 2-channel stereo
40 – 13,000 Hz (±3 dB),
using Sony TYPE I
cassette
40 – 14,000 Hz (±3 dB),
using Sony TYPE II
cassette
±0.15% W.Peak (IEC)
0.1% W.RMS (NAB)
±0.2% W.Peak (DIN)