Sony MHC-RG222 Instrukcja obsługi - Strona 32

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sony MHC-RG222. Sony MHC-RG222 48 stron. Sony operating instructions owner's record mini hi-fi component system mhc-gx750, gx450, gx250, mhc-rg555, rg551s, rg444s, rg441, rg333, rg222, rg221, rg121, rg100, mhc-rx550
Również dla Sony MHC-RG222: Instrukcja obsługi (47 strony)

Drukuj stronę

Listening to audio using

wireless system

Start playing the connected

component.

Press WIRELESS on the unit to switch

the function to WIRELESS.

When the sound is distorted

Move CHANNEL 1–3 on the transmitter to

select a radio frequency.

CHANNEL 1:

CHANNEL 2:

CHANNEL 3:

Press WIRELESS on the unit.

"AUTO SCAN" appears.

When FM broadcast or noise or no audio is

heard, press WIRELESS on the unit several

times. If you do not hear clear audio, select

another channel using CHANNEL 1–3 on the

transmitter, then press WIRELESS on the unit

again.

To finish using WIRELESS

function

Press any function button to select different

function and quit WIRELESS.

Notes

• You may not hear the beginning of the sound from

the main unit until the transmitter starts sending the

RF signals after detecting an audio signal.

• If the transmitter is connected to the headphones jack

of the source component, set the volume of that

component as high as possible without distorting the

audio signal.

• If you hold the antenna of the transmitter with your

hand, noise may occur. However this is not a

malfunction.

• When the transmitter is not to be used for a long

period of time, disconnect the AC power adaptor

from the wall outlet holding the plug. Do not pull on

the cord.

913.6 MHz

914.0 MHz

914.4 MHz