Sony MHC-RV555 Instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sony MHC-RV555. Sony MHC-RV555 48 stron.
Drukuj stronę3 Connect the FM and AM antennas.
Set up the AM loop antenna, then connect
it.
AM loop antenna
Extend the FM lead antenna horizontally
Note
Keep the antennas away from the speaker cords.
4 Connect the video input jack of your TV
to the VIDEO OUT jack with the
supplied video cord.
When using a TV
Turn on the TV and select the video input so you can
view the pictures from this system.
5 For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
Refer to the print on your system's
VOLTAGE SELECTOR for available
settings.
8
GB
* Saudi Arabian model: 120 – 127 V
6 Connect the power cord to a wall
outlet.
The demonstration appears in the display.
When you press ?/1, the system turns on
and the demonstration automatically ends.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only for
models equipped with an adaptor).
Note
Install this system so that the power cord can be
unplugged from the wall socket immediately in the
event of trouble.
7 Set the color system to PAL or NTSC
depending on the color system of your
TV while the power is off.
Use buttons on the unit for the
operation.
The color system
of your TV
AUTO
(factory setting)
NTSC
PAL
Notes
• You cannot set the color system in Power Saving
Mode (page 30).
• When you play back a VIDEO CD recorded in a
different color system from the one you set to the
unit, the picture image may be distorted.
Do this
Press ?/1 while holding
down X. If your TV
automatically changes the
color system according to
the input signal, the system
is set to AUTO.
Press ?/1 while holding
down M. The system is
set to NTSC.
Press ?/1 while holding
down m. The system is
set to PAL.