Sony MZ-R500 Instrukcja obsługi - Strona 26
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System stereo Sony MZ-R500. Sony MZ-R500 40 stron. Marketing specifications
Również dla Sony MZ-R500: Instrukcja obsługi (20 strony), Instrukcja obsługi (40 strony), Ograniczona gwarancja (1 strony), Specyfikacje (2 strony)
Drukuj stronę
2
Press >MENU. repeatedly
until "Erase" flashes in the display,
and then press ENTER.
"Erase?" and "ENTER" appear
alternately in the display.
To cancel erasing, press x.
3
Press ENTER again.
"Edit" flashes in the display, and all
the tracks will be erased.
When erasing is complete, "BLANK"
appears in the display.
Adding a track mark
You can add track marks so that the part
after the new track mark is counted as a
new track.
The track numbers will increase as
follows.
Add a track mark
1
1
2
Track numbers increase
1
While playing or pausing an MD,
press T MARK at the point you want
to mark.
"MK ON" appears in the display, and
a track mark is added. The track
number will increase by one.
26
-GB
2
3
4
3
4
5
T MARK
To add track marks while
recording
Press T MARK at the point you want to
add a track mark.
Note
You cannot add track marks during synchro-
recording.
Erasing a track mark
When you record with analog (line) input,
unnecessary track marks may be recorded
where recording level is low. You can
erase a track mark to combine the tracks
before and after the track mark. The track
numbers will change as follows.
Erase a track mark
1
2
1
2
Track numbers decrease
.
1
While playing the track with the track
mark you want to erase, press X to
pause.
3
4
3
X
T MARK